Installing bathroom labour costs - Manchester...

May 02, 2014 3 Replies

What is a ballpark figure I can expect to pay to have someone install toilet, washbasin, bath, electric shower, extractor fan, lighting and all associated wiring, tiling and plumbing works in a 5'x9' bathroom in the Greater Manchester area?



Room was previously used as a bathroom so close access to soil pipe, waste water drainage and potable water services are close by.


More info required - all parts supplied? Electrics - RCD protected board, cables already in etc? Quality of parts supplied (B+Q type stuff is harder to fit than better quality parts)

I'd say to start at £1000 for labour, and £1000 for parts. Better quality bathroom goods cost a lot more than the rubbish at B+Q, so for a reasonable finish, expect £3000 upward for supply and fit.

If you want the cheapest rubbish, then £1500 all in could be done.

All parts would be supplied, but have not decided on the exact parts yet, was just looking for a ballpark for labour costs to put together a budget for the job. Bathroom never had a shower before so a separate circuit needs to go in for that. Electrics should support it.

Area above the bath and sink will be tiled. Rest will be painted.

Nothing

Might be an idea to do it

Floor above, same side

Yeah, it's good enough.

Painting

Painting

Wooden.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required