In fact you are free to cover the top with a tea towel so that any spill ends up on that and you can just toss it in the washing machine with the other stuff instead of having to clean the top of the hob after cooking.
In fact you are free to cover the top with a tea towel so that any spill ends up on that and you can just toss it in the washing machine with the other stuff instead of having to clean the top of the hob after cooking.
Unlikely that rings would be ferromagnetic material tho I suppose that very cheap stuff could be if made from the stainless steel which is ferromagnetic
But the other problem is that the ring is FAR too small to be detected and so the induction hub wouldn't even see it so wouldn't be transmitting any power to it
It's a myth
Charlemagne doing his own housework...
I know you said "is said to have", but I don't think it passes the sniff test.
The switches don't have to switch the inductive loads directly. A modest switch plus a triac (for example) might be cheaper than a chunky switch.
The passive voice is the first refuge of a scoundrel.
Wow! What an education. Thanks so much for all the info.
Why would that matter? Your question was bout what the hobs draw.
Please explain your point.
On todays 'Homes Under the hammer', a new buyer was going to replace the HWC with an instant water heater and replace the storage heaters with 'modern panel radiators', because 'they are more efficient *and* economical'.
Blimey, and he can vote too. Worrying.
As noted up thread spills don’t get baked onto the top of an induction hob , but neither does a spill of water get steamed off so you can end up with a puddle if you let the spuds boil over. An absorbent cloth placed under a pan is an easy preemptive measure to soak up such a spill but doesn’t get scorched.
GH
Friend did this a couple of years ago in his large Victorian terrace. Rationale was partly environmental, partly recently installed solar and battery, partly bonkers.
Just looked up his last year's consumption - 18000 kW/hrs. Over double a comparable home with a heat pump in my little study.
In message snipped-for-privacy@mid.individual.net>, at 22:31:11 on Sun, 4 Oct
2026, Marland snipped-for-privacy@btinternet.co.uk> remarked:
They do when they creep under the pan due to capillary action, and the hot base of the pan bakes them onto the glass.
Isn't the basic physics simply that magnetic field that change in time induce currents in conductors (see e.g. Faraday's Law), and the resistance of the conductor then means that the induced currents dissipate as heat. In which case it would be the resistivity of the metal pan which counted, not its magnetic properties; and it happens that the resistivity of iron or steel is much greater than copper or aluminium.
#Paul
Apparently not, It's eddy current heating which requires ferromagnetic.
Just as microwaves use dielectric heating, not resistive...
You get eddy currents in any conductor, but they are more effective at heating in ferromagnetic materials. This is because the "skin depth" (in which most of an alternating current flows) is much smaller for ferromagnetic materials, so the effective resistance will be much higher even if the resistivity is the same.
Conversely, you want to minimize the resistance of the conductors in the hob itself, so they are bundles of insulated fine copper wires thinner than the skin depth (Litz wire).
Skin depth also depends on frequency. Panasonic sell "Met All" branded inducation hobs that work with all metals by using higher frequencies.
-- Richard
Doesn't explain why one stainless steel works and the other doesn't
Some stainless steel is ferromagnetic, some isn't. Depends on the exact alloy and crystal structure.
No news, but I was commenting on the fact that copper or aluminium doesn't work but one stainless steel does, and the other doesn't so that can have nothing to do with the resistivity given that both of the stainless steels have similar conductivity which is nothing like that of copper and aluminium
Have something to add? Share your thoughts — no account required.
Ask the community — no account required