Just about to change the bearings/ Seal on a Hotpoint WMA series Washer Any Tips ! Thanks BigGuyUK
- posted
19 years ago
Just about to change the bearings/ Seal on a Hotpoint WMA series Washer Any Tips ! Thanks BigGuyUK
When hammering the old one out, make sure it stays parallel in the hole. I broke the drum as it got wedged at an angle and cracked the sleeve. I'm still using it, but I suspect it will come to pieces within a few months now.
hotpoints come with a five year parts guarantee, when mine went I got teh whole drum assembly replaced, practically a new machine. I'd speak to the shop first before touching anything. Its a common fault
roy
In my case, the machine was ~18 years old, and the really maddening thing is I misdiagnosed the problem -- there was absolutely nothing wrong with the bearings I removed in the first place. Been kicking myself ever since...
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.