There is nothing "visible" on the inside. The pipe disappears under the floor to feed boiler/stove/fireplace on the other side of the house.
- Vote on answer
- posted
2 years ago
Gas Pipe general query
Loading thread data ...
- Vote on answer
- posted
2 years ago
It appears that the iron does not run all the way through the wall. Although obliviously difficult to see there is a significant reduction in pipe diameter just inside the sleeve. I assumed that this is a return to copper and if it is then I have no idea why the iron coupler has been fitted. Unless this is to satisfy some requirement or other.
- Vote on answer
- posted
2 years ago
Or it 'was all I had to hand at the time in the van, guv'
- Vote on answer
- posted
2 years ago
I'd get in touch with your gas board. They will have originally sited the meter outdoors. And should have used galvanised fittings, if iron barrel.
- Vote on answer
- posted
2 years ago
I'm not sure if the OP will thank you for his floor being dug up!
Though something tells me they will reroute any pipework to take an easier path.