Linking loosely back to the current switch thread and me remembering I have a load of DIN rail mount relays that will do what I want I'm struggling to find a nice box to stick 'em in.
Google for Gewiss enclosures.
And the search eBay for the model you want.
Here is a stater for you
In article , Dave Liquorice writes
Sounds like you're looking for a mini consumer unit eg:
Your best bet would be to plough through the six million enclosures on the RS, Farnell or CPC websites - there are entire sections that are reasonably priced for a one off. Buy the DIN rail from the same place and make your own. You'll get exactly what you need.
En el artículo , Tim Watts escribió:
+1.Buy the spacers to lift the DIN rail off the enclosure bottom, too, or you won't be able to clip the modules onto the rail.
e.g. RS 282-1001
yes there are. I bought one and put my own DIN rails in. And zillions of connector blocks and a mains relay - all to make a 'control centre' for the CH..
Got it from electrical factors.
I use the ones CPC sell, but for relays, I tend to use the DIN rail mounting relays, which again CPC sell.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required