I have some radiators that don't have a place to put a radiator key to bleed them. They are single panel but the top is sort of "rolled over" and there is no valve to open. One is cold at the top - I would normally just let the air out - can anyone advise how I can fix it?
Thanks
Sam
Look on the back of the top of the radiator near each end. You should find an 'ole, poss. covered by a plastic plug which you can get out with yout thumbnail. There's a bleed screw in there.
Are you sure there isn't a bleed screw on the back of the radiator at the top. Some of mine are here instead of the normal place at the ends.
HTH
John
Found it - thanks for your help, much warmer.
Sam
Have something to add? Share your thoughts — no account required.
Ask the community — no account required