I know this post is rather old but I've had another problem with my boiler recently, which I have sorted. I've had various problems with the PCBs over the years so seeing as you have drawn out the circuit I would be most grat eful if you could send me a copy. Thanks, Graham
Hi. Long story. Same problem with ignition pcb. Do you still have the circuit diagram and know which components usually fail? Many thanks. Tim ( snipped-for-privacy@live.co.uk)
Hi CRB, I know this is an old post - but wondering if you still had that Ignition PCB schematic? I'm an electronic engineer and I did try to get a schematic off Baxi and off Pektron a few years ago, but they wouldn't oblige! Thanks in advance - I would be most grateful if you could send me a copy.
FOURTEEN YEARS old?
But
Andy
For what it's worth there appears to a be thriving boiler PCB replacement/refurb scene on ebay these days. When I needed a boiler PCB Geoff didn't have it, but there were dozens of sellers on ebay.
In the end I bought a new 'aftermarket' board that claimed to be better than the original, got somebody to fit it (I wasn't able to be there otherwise would have DIYed) and it worked fine.
Theo
I'm changing out 2 Baxi boilers next week 1 x Barcelona and 1 x 100HE
If you want any of the cards let me know. (all working) I had a big box of Baxi spares only scrapped them about a month ago, including about a dozen cards, and 3 or 4 new looms.
You are IMM, I claim my £5 :-)
Not sure what 'you are IMM' means. If you want any parts then contact me to let me know, just be cost of shipping.
Delay to job, first one being done on 7th Nov ... 2nd one on 9th
many years ago we had a regular poster here on uk.d-i-y using the moniker IMM - International Man of Mystery.
He constantly espoused the dual combi boiler 'solution' to larger heating loads. One upstairs, one downstairs !.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required