Hello,
Despite my best attempts, whilst removing some old tiles from the wall, a tile fell onto the bath below. It has left a couple of small scratches. I see that you can buy a "bath rubber" and "enamel polish" from Screwfix. Do these work or will it need to be re sprayed?
Thanks in advance.
I have a little pot of Ronseal kitchen and bathroom enamel repair paint. I have used it to whiten the exposed edges of tiles on an external corner that whoever put up the tiles thought would look ok in terracota. I have also used it on the faces of some tiles. That might be a better solution or one used in conjunction with the above, fill then flatten and polish.
Peter
I got a small "nail varnish" type bottle of stuff from the plumbing shop. Put out by the bath manufacturer. Two or three touch up coats fixed up a few big chips. Invisible to a casual observer. Regards Bill
Have something to add? Share your thoughts — no account required.
Ask the community — no account required