Yes, indeed. And once re-connected, the water company will be able to access the information stored in the meter in order to determine how much was consumed - even if some of the consumption took place whilst the remote device was disconnected.
Anyone know if I can briefly disconnect my outside water meter please?
Dec 17, 2013
27 Replies
I take it that is bad? Never lived in a place with a water meter so haven't a clue about what is "normal" for water use.
We have water meter in a hole in the ground, that also has a remote reader in the lid on the hole, but it also has the reading on the meter itself. Though ours are mechanical, rather than electronic.
We use in the order of 240 cubic metres per annum (family of 4)
Bet that doesn't work for HV... :-)
That is more than enough to fill an Olympic size swimming pool. A two person household averages about 110 cubic metres a year.
Colin Bignell
Wiring regs do allow mains and signal cables to be together, but both must be insulated (and quite often are anyway) to the higher voltage.
However, mains and data side by side can cause interference and data loss or corruption, so simple practicality requires an earthed metal screen between them - which could be a screen or armour as part of one of the cables.
Very likely.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required