Are threads on brass bolts the same as on steel? And can I use steel wingnuts on brass bolts or will that cause a thermonuclear pile or something as bad? Some kits come not with hexnuts but with...
read more »
My Sons underwear just got flushed down the toilet.( he's new to being potty trained and thought cleaning in the toilet, then flushing was ok) they actually flushed and the water went down, then...
I have a single handle Delta faucet in my kitchen that dispenses water either all hot or all cold- no warm. I have replaced the springs and washers and the ball that attaches to the handle. Have I...
I have a cast iron bath which I wish to retain. It has two taps which I wish to replace. I've managed to remove the nut holding the hot water tap because it is on the side away from the wall. The...
I have an old fuse box in my house that has one tamper proof fuse adapter....it requires the type s fuse. I would like to remove the adapter so I can use the standard more easily found fuses for that...
Hi all, When I moved into my house the previous owner left a second dryer behind- with a note saying dryer is good, but timer doesn't work. Both dryers were quite old- so I decided to keep the second...
This AM, noticed that the oil furnace blower continued to run despite burner stopping to the point where it was blowing out cold air continuously. Upon manually disconnecting furnace from AC and then...
Dear Help Page: We have a problem. We have a very old (but serviceable as its limited use only heated part of the house for over 52 years) General Electric Gas Fired Warm Air Furnace Model 21 LG. (BTU...
Hi all some of our freezer drawers are broken - either the front wall where people have pulled at semi frozen-in drawers, or on some drawers the clear insert which forms part of the handle has...
Got a now-broken, 20-year-old microwave oven that I'm trying to remove. It was made by General Electric and says "GE SpaceMaker" (or SpaceSaver?) on the outside. I've installed other brands before, so...
The gas isolation valve shown in the picture is stuck. It's under a gas fire. I didn't want to force it. Any ideas of how to get that moving? Thanks!
What type of plastic is a shroud? (The one used around a fan in front of a car radiator). Mine has a crack which I want to fix using some sort of epoxy or JB Weld, but some plastics can not be glued....
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.
