10 discussions on HomeOwnersHub about the Makita 3612BR: what owners asked, what went wrong, and what fixed it.
My 1-3/4" thick solid laminated maple work bench is exactly that, solid. That means no dog holes. Anyone have experience drilling 3/4" diameter bench dog holes that are actually vertical as they should be and not slightly tilted? I've...
And would you buy the same brand/model again or would you replace itwith another brand/model?Thanks,M
Which is better under a router table, plunge or non-plunge? I'vewatched the Router Workshop on TV with the older guy and his son andthey swear by the plunge router with the springs removed. Is there areal advantage to that or is it just...
I am looking to buy a cheap beginner router from Ebay and I keep seeing thissame model posted by many different people, but no one will tell me whatbrand it is: The above link is to an ebay auction that I have no relation towhatsoever.Is...
I know there is some pocket hole screw guys out there. I don't have the Kreg tool, yet, but I've got a Taiwanese rip off. I got it from Rockler about 6 years ago. What I'm wondering is, on the good Kreg, does it leave the screw heads just a...
Hi folks, I've got some gloating to do, then I have a couple of questions.GLOAT MODE ONA couple of weeks ago, SWMBO and I were laying in bed one weekendmorning, drinking our coffee and watching Norm build an Adirondacklove seat. I suggested...