SECTION 8: WIRING
These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Compare the manufacture date of your machine to the one stated in this manual, and study this section carefully.
If there are differences between your machine and what is shown in this section, call Technical Support at (570) 546-9663 for assistance BEFORE making any changes to the wiring on your machine. An updated wiring diagram may be available. Note: Please gather the serial number and manufacture date of your machine before calling. This information can be found on the main machine label.
WARNING
Wiring Safety Instructions
SHOCK HAZARD. Working on wiring that is connected to a power source is extremely dangerous. Touching electrified parts will result in personal injury including but not limited to severe burns, electrocution, or death. Disconnect the power from the machine before servicing electrical components!
MODIFICATIONS. Modifying the wiring beyond what is shown in the diagram may lead to unpredictable results, including serious injury or fire. This includes the installation of unapproved aftermarket parts.
WIRE CONNECTIONS. All connections must be tight to prevent wires from loosening during machine operation. Double-check all wires disconnected or connected during any wiring task to ensure tight connections.
CIRCUIT REQUIREMENTS. You MUST follow the requirements at the beginning of this manual when connecting your machine to a power source.
WIRE/COMPONENT DAMAGE. Damaged wires or components increase the risk of serious personal injury, fire, or machine damage. If you notice that any wires or components are damaged while performing a wiring task, replace those wires or components.
MOTOR WIRING. The motor wiring shown in these diagrams is current at the time of printing but may not match your machine. If you find this to be the case, use the wiring diagram inside the motor junction box.
CAPACITORS/INVERTERS. Some capacitors and power inverters store an electrical charge for up to 10 minutes after being disconnected from the power source. To reduce the risk of being shocked, wait at least this long before working on capacitors.
EXPERIENCING DIFFICULTIES. If you are experiencing difficulties understanding the information included in this section, contact our Technical Support at (570) 546-9663.
NOTICE
The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com.
COLOR KEY
| BLACK | BLUE | YELLOW | LIGHT BLUE |
|---|---|---|---|
| Bk | Bl | Yl | Lb |
| WHITE | BROWN | YELLOW GREEN | BLUE WHITE |
|---|---|---|---|
| Wt | Br | Yg | Bw |
| GREEN | GRAY | PURPLE | TURQUOISE |
|---|---|---|---|
| Gn | Gy | Pu | Tu |
| RED | ORANGE | PINK |
|---|---|---|
| Rd | Or | Pk |
-74-
G0513, G0513A40 & G0513X2 Wiring Diagram
STOP READ ELECTRICAL SAFETY ON PAGE 74! -75-
G0513X2BF Wiring Diagram
-76- STOP READ ELECTRICAL SAFETY ON PAGE 74! G0513 Series Bandsaws (Mfd. Since 08/22)
SECTION 9: PARTS
We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability.
G0513 & G0513A40 Main
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -77-
G0513 & G0513A40 Main Parts List
| REF | PART # | DESCRIPTION |
|---|---|---|
| 4 | P0513004 | LIFTING EYE BOLT M10-1.5 |
| 5 | P0513005 | MACHINE BODY |
| 8 | P0513008 | FLAT WASHER 6MM |
| 9 | P0513009 | POWER CORD 14G 3W 72" |
| 10 | P0513010 | HEX NUT M6-1 |
| 11 | P0513011 | POINTER |
| 11-1 | P0513011-1 | TENSION SCALE LABEL |
| 12 | P0513012 | STEP SCREW M4-.7 X 5 |
| 13 | P0513013 | HINGE SHAFT |
| 14 | P0513014 | ROLL PIN 5 X 36 |
| 15 | P0513015 | UPPER WHEEL SHAFT HINGE |
| 16 | P0513016 | UPPER WHEEL SHAFT |
| 17 | P0513017 | BUSHING |
| 18 | P0513018 | BALL BEARING 6204-2RS |
| 19 | P0513019 | UPPER WHEEL 17" |
| 20 | P0513020 | INT RETAINING RING 47MM |
| 21 | P0513021 | WHEEL FLAT WASHER 8MM |
| 22 | P0513022 | CAP SCREW M8-1.25 X 16 |
| 23 | P0513023 | SAW BLADE 131.5" X 1/2" 6TPI HOOK |
| 24 | P0513024 | LOCK WASHER 8MM |
| 25 | P0513025 | HEX BOLT M6-1 X 30 |
| 26 | P0513026 | URETHANE TIRE 17" 1-PAIR |
| 27 | P0513027 | LOWER WHEEL 17" |
| 28 | P0513028 | LOWER WHEEL PULLEY |
| 29 | P0513029 | HEX NUT 1-14 |
| 30 | P0513030 | LOCK WASHER 1" |
| 31 | P0513031 | MOTOR CORD 14G 3W |
| 32 | P0513032 | COMPRESSION SPRING 7 X 8 X 90 |
| 33 | P0513033 | ROLL PIN 3 X 16 |
| 34 | P0513034 | ALIGNMENT PLATE |
| 35 | P0513035 | THRUST BEARING 51201 |
| 36 | P0513036 | 2-BUTTON POWER SWITCH |
| 37 | P0513037 | HANDWHEEL TYPE-17 137D X 10B-S |
| 38 | P0513038 | TENSION ADJUSTING ROD |
| 39 | P0513039 | FLANGE SCREW M5-.8 X 10 |
| 40 | P0513040 | EXT TOOTH WASHER 5MM |
| 41 | P0513041 | HEX NUT M5-.8 |
| 42 | P0513042 | FLANGE SCREW M5-.8 X 16 |
| 43 | P0513043 | SWITCH BACK PLATE |
| 44 | P0513044 | HEX BOLT M8-1.25 X 16 |
| 45 | P0513045 | FLAT WASHER 8MM |
| 46 | P0513046 | UPPER WHEEL SLIDING BRACKET |
| 47 | P0513047 | HEX BOLT M6-1 X 25 |
| 48 | P0513048 | RIVET 3 X 13MM BLIND, STEEL |
| 49 | P0513049 | HEX BOLT M6-1 X 10 |
| 50 | P0513050 | CLEAR WINDOW |
| 55 | P0513055 | UPPER WHEEL COVER (G0513) |
| 55 | P0513A40055 | UPPER WHEEL COVER (G0513A40) |
| 55A | P0513055A | UPPER WHEEL COVER ASSY (G0513) |
| 55A | P0513A40055A | UPPER WHEEL COVER ASSY (G0513A40) |
| 56 | P0513056 | HEX BOLT M6-1 X 10 |
| 57 | P0513057 | FLAT WASHER 6MM |
| 58 | P0513058 | WHEEL BRUSH |
| 59 | P0513059 | HEX BOLT M6-1 X 25 |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 60 | P0513060 | STAR KNOB |
| 61 | P0513061 | LOCK NUT M6-1 |
| 62 | P0513062 | STRAIN RELIEF TYPE-1 5/8 |
| 63 | P0513063 | HEIGHT POINTER |
| 64 | P0513064 | HEX NUT M8-1.25 |
| 65 | P0513065 | HEX BOLT M8-1.25 X 100 |
| 66 | P0513066 | STAR KNOB BOLT M10-1.5 X 20 |
| 67 | P0513067 | STAR KNOB BOLT M10-1.5 X 55 |
| 68 | P0513068 | THREADED HANDLE M10-1.5 |
| 69 | P0513069 | CAM |
| 70 | P0513070 | PILLOW BLOCK |
| 71 | P0513071 | HANDLE M12-1.75 |
| 72 | P0513072 | LEVER |
| 73 | P0513073 | HEX NUT M12-1.75 |
| 74 | P0513074 | LEVER HUB |
| 75 | P0513075 | CAP SCREW M8-1.25 X 20 |
| 76 | P0513076 | LOCK WASHER 8MM |
| 78 | P0513078 | SHAFT COVER |
| 79 | P0513079 | SET SCREW M8-1.25 X 20 |
| 80 | P0513080 | HEX NUT M8-1.25 |
| 81 | P0513081 | LOWER WHEEL SHAFT |
| 82 | P0513082 | MOTOR 2HP 110V/220V 1-PH |
| 82-1 | P0513082-1 | MOTOR FAN COVER |
| 82-2 | P0513082-2 | MOTOR FAN |
| 82-3V2 | P0513082-3V2 | S CAP 300M 250V 1-1/2 X 2-3/8 V2.01.10 |
| 82-4 | P0513082-4 | S CAPACITOR COVER |
| 82-5V2 | P0513082-5V2 | R CAP 40M 250V 1-1/2 X 2-3/4 V2.01.10 |
| 82-6 | P0513082-6 | R CAPACITOR COVER |
| 82-7 | P0513082-7 | MOTOR JUNCTION BOX |
| 82-8 | P0513082-8 | CONTACT PLT-TUNGSTEN 5HP OR LESS |
| 82-9 | P0513082-9 | CENTRIFUGAL SWITCH 5/8-1725 |
| 82-9A | P0513082-9A | CENTRIFUGAL SWITCH W/CONT PLATE |
| 82-10 | P0513082-10 | BALL BEARING 6203ZZ (FRONT) |
| 82-11 | P0513082-11 | BALL BEARING 6205ZZ (REAR) |
| 83 | P0513083 | HEX BOLT M5-.8 X 16 |
| 84 | P0513084 | LOCK WASHER 5MM |
| 85 | P0513085 | MOTOR MOUNT BRACKET |
| 86 | P0513086 | CAP SCREW M8-1.25 X 20 |
| 87 | P0513087 | STRAIN RELIEF PLATE 2-HOLE |
| 88 | P0513088 | FLANGE SCREW M5-.8 X 10 |
| 89 | P0513089 | PILLOW BLOCK |
| 90 | P0513090 | KEY 5 X 5 X 35 |
| 91 | P0513091 | HEX BOLT M8-1.25 X 20 LH |
| 92 | P0513092 | MOTOR PULLEY TYPE-A 3.5" |
| 93 | P0513093 | V-BELT A42 |
| 94 | P0513094 | HEX BOLT M6-1 X 10 |
| 95 | P0513095 | LOWER WHEEL COVER (G0513) |
| 95 | P0513A40095 | LOWER WHEEL COVER (G0513A40) |
| 97 | P0513097 | FLAT WASHER 8MM |
| 119 | P0513119 | FLAT WASHER 8MM |
| 152 | P0513152 | HEX BOLT M6-1 X 20 |
| 175 | P0513175 | HEX BOLT M6-1 X 20 |
| 176 | P0513176 | BUSHING |
-78-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G0513 & G0513A40 Table, Trunnion & Lower Blade Guides
| REF | PART # | DESCRIPTION |
|---|---|---|
| 77 | P0513077 | LOCK WASHER 8MM |
| 96 | P0513096 | FLAT WASHER 8MM |
| 98 | P0513098 | CAP SCREW M10-1.5 X 35 |
| 99 | P0513099 | HEX NUT M10-1.5 |
| 100 | P0513100 | TRUNNION GEAR |
| 101 | P0513101 | STAR KNOB BOLT |
| 102 | P0513102 | TRUNNION SUPPORT BRACKET |
| 103 | P0513103 | LOCK WASHER 10MM |
| 104 | P0513104 | FLAT WASHER 10MM |
| 105 | P0513105 | CAP SCREW M6-1 X 15 |
| 106 | P0513106 | CAP SCREW M6-1 X 50 |
| 107 | P0513107 | ALIGNMENT ROD |
| 108 | P0513108 | HEX NUT M6-1 |
| 109 | P0513109 | ADJUSTMENT KNOB BOLT M6-1 |
| 110 | P0513110 | BALL BEARING 6000ZZ |
| 111 | P0513111 | BUTTON HD CAP SCR M10-1.5 X 20 |
| 112 | P0513112 | FLAT WASHER 8MM |
| 113 | P0513113 | FLAT WASHER 8MM |
| 114 | P0513114 | PHLP HD SCR M4-.7 X 6 |
| 115 | P0513115 | GEAR PLATE |
| 116 | P0513116 | LOCK NUT M8-1.25 |
| 117 | P0513117 | PHLP HD SCR M4-.7 x 6 |
| 118 | P0513118 | LOCK HANDLE M8-1.25 |
| 119 | P0513119 | FLAT WASHER 8MM |
| 120 | P0513120 | POINTER |
| 121 | P0513121 | TRUNNION PLATE |
| 122 | P0513122 | LOCK WASHER 8MM |
| 123 | P0513123 | CAP SCREW M8-1.25 X 16 |
| 124 | P0513124 | CARRIAGE BOLT M8-1.25 X 80 |
| 126 | P0513126 | TABLE 17" X 17" (G0513) |
| 126 | P0513A40126 | TABLE 17" X 17" (G0513A40) |
| 127 | P0513127 | TABLE INSERT |
| 128 | P0513128 | TABLE PIN |
| 129 | P0513129 | HEX BOLT M8-1.25 X 20 LH |
| 130 | P0513130 | LEFT GUARD |
| 131 | P0513131 | THUMB SCREW M6-1 X 16 |
| 132 | P0513132 | LOWER BLADE GUIDE SUPPORT |
| 133 | P0513133 | BLADE GUIDE |
| 134 | P0513134 | GUIDE ADJUSTMENT SHAFT |
| 135 | P0513135 | RIGHT GUARD |
| 139 | P0513139 | CAP SCREW M10-1.5 X 30 |
| 148 | P0513148 | CARRIAGE BOLT M8-1.25 X 85 |
| 163 | P0513163 | LOCK WASHER 8MM |
| 196 | P0513196 | STEEL BALL 5MM |
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -79-
G0513 Fence
| REF | PART # | DESCRIPTION |
|---|---|---|
| 125 | P0513125 | FENCE ASSEMBLY W/RAILS |
| 201 | P0513201 | FRONT FENCE RAIL |
| 202 | P0513202 | FENCE BASE |
| 203 | P0513203 | ALIGNMENT SHAFT |
| 204 | P0513204 | LOCK BLOCK SHAFT |
| 205 | P0513205 | SPRING PLATE |
| 206 | P0513206 | SPACER PLATE |
| 207 | P0513207 | FENCE |
| 208 | P0513208 | SLEEVE |
| 209 | P0513209 | FENCE LOCK HANDLE |
| 210 | P0513210 | RAIL PAD |
| 211 | P0513211 | CONVEX WINDOW |
| 212 | P0513212 | CAP SCREW M6-1 X 55 |
| 213 | P0513213 | LOCK CAM |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 214 | P0513214 | REAR FENCE RAIL |
| 215 | P0513215 | HEX NUT M6-1 |
| 216 | P0513216 | HEX NUT M18-1.5 |
| 217 | P0513217 | FRONT RAIL END CAP |
| 218 | P0513218 | FENCE END CAP |
| 219 | P0513219 | REAR RAIL END CAP |
| 220 | P0513220 | TAP SCREW M3.5 X 8 |
| 221 | P0513221 | FENCE SCALE |
| 222 | P0513222 | HEX NUT M6-1 |
| 223 | P0513223 | LOCK WASHER 6MM |
| 225 | P0513225 | HEX BOLT M6-1 X 20 |
| 226 | P0513226 | FLANGE SCREW M4-.7 X 10 |
| 227 | P0513227 | FLAT WASHER 6MM |
| 228 | P0513228 | CAP SCREW M6-1 X 16 |
-80- BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G0513A40 Fence
| REF | PART # | DESCRIPTION |
|---|---|---|
| 201 | P0513A40201 | SPACER PLATE |
| 202 | P0513A40202 | ADJUST BASE |
| 203 | P0513A40203 | FENCE MOUNT ROD |
| 204 | P0513A40204 | LOCK BLOCK |
| 205 | P0513A40205 | SHAFT |
| 206 | P0513A40206 | SPRING PIECE |
| 207 | P0513A40207 | CONVEX WINDOW |
| 208 | P0513A40208 | REAR RAIL 640MM |
| 209 | P0513A40209 | RAIL PAD M6-1 X 20 |
| 210 | P0513A40210 | FENCE HANDLE M8-1.25 X 22 |
| 211 | P0513A40211 | GUARD PIECE |
| 212 | P0513A40212 | PLUG |
| 213 | P0513A40213 | FRONT RAIL 640MM |
| 214 | P0513A40214 | CAST IRON FENCE 590MM |
| 215 | P0513A40215 | LOCKING HANDLE M8-1.25 X 44 |
| 216 | P0513A40216 | MOVING PLATE |
| 217 | P0513A40217 | FLAT WASHER 6MM |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 218 | P0513A40218 | LOCK WASHER 6MM |
| 219 | P0513A40219 | HEX BOLT M6-1 X 20 |
| 220 | P0513A40220 | TAP SCREW M3.5 X 8 |
| 221 | P0513A40221 | CAP SCREW M6-1 X 16 |
| 222 | P0513A40222 | FLANGE BOLT M4-.7 X 8 |
| 223 | P0513A40223 | HEX NUT M8-1.25 |
| 224 | P0513A40224 | FLANGE SCREW M4-.7 X 6 |
| 225 | P0513A40225 | CAP SCREW M6-1 X 25 |
| 226 | P0513A40226 | HEX NUT M6-1 |
| 227 | P0513A40227 | FLAT WASHER 8MM |
| 228 | P0513A40228 | ALUMINUM RESAW FENCE 590MM |
| 228-1 | P0513A40228-1 | TAP SCREW M3.5 X 12 |
| 228-2 | P0513A40228-2 | FENCE END CAP |
| 229 | P0513A40229 | RESAW DRIFT BAR 6-1/4" X 1-1/4" |
| 230 | P0513A40230 | FENDER WASHER 8MM |
| 231 | P0513A40231 | ADJ HANDLE 65L, M8-1.25 X 25 |
| 232 | P0513A40232 | FENCE SCALE 18-1/2" |
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -81-
G0513 & G0513A40 Upper Blade Guides & Miter Gauge
-82- BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
G0513 & G0513A40 Upper Blade Guides & Miter Gauge Parts List
Left Table
| REF | PART # | DESCRIPTION |
|---|---|---|
| 6 | P0513006 | SET SCREW M5-.8 X 5 |
| 134 | P0513134 | GUIDE ADJUSTMENT SHAFT |
| 136 | P0513136 | CAP SCREW M8-1.25 X 80 |
| 137 | P0513137 | FLAT WASHER 8MM |
| 138 | P0513138 | UPPER BLADE GUARD |
| 138-1 | P0513138-1 | BLADE GUARD SCALE |
| 140 | P0513140 | STEP SCREW M4-.7 X 5 |
| 141 | P0513141 | FIBER WASHER 5MM |
| 142 | P0513142 | SLIDING PLATE |
| 143 | P0513143 | EXT RETAINING RING 15MM |
| 144 | P0513144 | BALL BEARING 6202ZZ |
| 145 | P0513145 | UPPER BLADE GUIDE SUPPORT |
| 146 | P0513146 | BLADE GUIDE |
| 147 | P0513147 | THUMB SCREW M6-1 X 16 |
| 149 | P0513149 | CAP SCREW M6-1 X 15 |
| 150 | P0513150 | ADJUSTMENT SHAFT |
| 151 | P0513151 | UPPER SPACING SLEEVE |
| 153 | P0513153 | UPPER GUIDE SUPPORT BLOCK |
| 154 | P0513154 | PHLP HD SCR M4-.7 X 10 |
| 155 | P0513155 | HEX NUT M4-.7 |
| 156 | P0513156 | RACK |
| 157A | P0513157A | GUIDE POST ASSEMBLY |
| 157 | P0513157 | GUIDE POST |
| 158 | P0513158 | HANDWHEEL TYPE-17 137D X 10B-S X M10-1.5 |
| 159 | P0513159 | HEX BOLT M6-1 X 20 |
| 160 | P0513160 | LOCK COLLAR |
| 161V2 | P0513161V2 | THREADED BUSHING V2.06.09 |
| 162 | P0513162 | CAP SCREW M8-1.25 X 20 |
Right Table
| REF | PART # | DESCRIPTION |
|---|---|---|
| 163 | P0513163 | LOCK WASHER 8MM |
| 164V2 | P0513164V2 | GUIDE BRACKET 14MM V2.06.09 |
| 165 | P0513165 | WORM CYLINDER |
| 166 | P0513166 | FIXED PLATE |
| 167 | P0513167 | PINION GEAR 15T |
| 168 | P0513168 | PINION GEAR STEP BOLT |
| 169 | P0513169 | BRACKET COVER |
| 170 | P0513170 | CAP SCREW M8-1.25 X 16 |
| 171 | P0513171 | PHLP HD SCR M4-.7 X 8 |
| 172 | P0513172 | SET SCREW M6-1 X 16 |
| 173 | P0513173 | MITER GAUGE ASSY |
| 173-1 | P0513173-1 | GUIDE BAR |
| 173-2 | P0513173-2 | T-SLOT WASHER 8MM BLACK |
| 173-3 | P0513173-3 | INDICATOR |
| 173-4 | P0513173-4 | NYLON WASHER 1/4" |
| 173-5 | P0513173-5 | MITER GAUGE HANDLE 1/4"-20 |
| 173-6 | P0513173-6 | MITER GAUGE BODY |
| 173-7 | P0513173-7 | INDEXING PIN |
| 173-8 | P0513173-8 | PHLP HD SCR M6-1 X 6 |
| 173-9 | P0513173-9 | FLANGE SCREW M5-.8 X 8 |
| 174V2 | P0513174V2 | BUSHING W/HEX NUT V2.04.19 |
| 192 | P0513192 | HEX WRENCH 5MM |
| 193 | P0513193 | HEX WRENCH 8MM |
| 194 | P0513194 | WRENCH 10 X 13MM OPEN-ENDS |
| 196 | P0513196 | STEEL BALL 5MM |
| 198 | P0513198 | CAP SCREW M5-.8 X 12 |
| 199 | P0513199 | FLAT WASHER 5MM |
G0513 Series Bandsaws (Mfd. Since 08/22)
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
-83-
G0513 Labels
| REF | PART # | DESCRIPTION |
|---|---|---|
| 177V2 | P0513177V2 | MACHINE ID LABEL V2.07.18 |
| 178 | P0513178 | ELECTRICITY LABEL |
| 179 | P0513179 | GLASSES/RESPIRATOR LABEL |
| 180 | P0513180 | READ MANUAL LABEL |
| 181 | P0513181 | DOOR WARNING LABEL |
| 183 | P0513183 | DISCONNECT POWER LABEL |
| 184 | P0513184 | GRIZZLY NAMEPLATE-SMALL |
| 185 | P0513185 | SAW TENSION LABEL |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 186 | P0513186 | MODEL NUMBER LABEL |
| 187 | P0513187 | TOUCH-UP PAINT, GRIZZLY GREEN |
| 188 | P0513188 | TOUCH-UP PAINT, LIGHT GRAY |
| 189 | P0513189 | GUIDE POST ADJUST LABEL |
| 191 | P0513191 | BLADE TENSION SCALE LABEL |
| 195 | P0513195 | GUIDE POST LOCK LABEL |
| 197 | P0513197 | GRIZZLY.COM LABEL |
WARNING
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-84- BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. G0513 Series Bandsaws (Mfd. Since 08/22)
G0513A40 Labels
| REF | PART # | DESCRIPTION |
|---|---|---|
| 301 | P0513A40301 | MACHINE ID LABEL |
| 302 | P0513A40302 | MODEL NUMBER LABEL |
| 303 | P0513A40303 | GRIZZLY NAMEPLATE |
| 304 | P0513A40304 | DO NOT OPEN DOOR LABEL |
| 305 | P0513A40305 | DISCONNECT POWER LABEL |
| 306 | P0513A40306 | TOUCH-UP PAINT, GRIZZLY GREEN |
| 307 | P0513A40307 | TOUCH-UP PAINT, GRIZZLY BLACK |
| 308 | P0513A40308 | GRIZZLY.COM LABEL |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 309 | P0513A40309 | 40TH ANNIVERSARY LABEL |
| 310 | P0513A40310 | ELECTRICITY LABEL |
| 311 | P0513A40311 | READ MANUAL LABEL |
| 312 | P0513A40312 | EYE LUNG HAZARD LABEL |
| 313 | P0513A40313 | BLADE TENSION SCALE LABEL |
| 314 | P0513A40314 | GUIDE POST ADJUST LABEL |
| 315 | P0513A40315 | SAW TENSION LABEL |
| 316 | P0513A40316 | GUIDE POST LOCK LABEL |
WARNING
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
-85-
G0513X2 Main
-86- BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
G0513X2 Main Parts List
| REF | PART # | DESCRIPTION |
|---|---|---|
| 2 | P0513X2002 | SET SCREW M6-1 X 10 |
| 3 | P0513X2003 | BUSHING |
| 4 | P0513X2004 | LIFTING EYE BOLT M10-1.5 |
| 5 | P0513X2005 | MACHINE BODY |
| 7 | P0513X2007 | BUSHING |
| 8 | P0513X2008 | FLAT WASHER 6MM |
| 9 | P0513X2009 | POWER CORD 14G 3W 72" |
| 10 | P0513X2010 | HEX NUT M6-1 |
| 11 | P0513X2011 | POINTER |
| 12 | P0513X2012 | STEP SCREW M4-.7 X 5 |
| 13 | P0513X2013 | HINGE SHAFT |
| 14 | P0513X2014 | ROLL PIN 5 X 36 |
| 15 | P0513X2015 | UPPER WHEEL SHAFT HINGE |
| 16 | P0513X2016 | UPPER WHEEL SHAFT |
| 17 | P0513X2017 | UPPER WHEEL ASSEMBLY |
| 17-1 | P0513X2017-1 | BUSHING |
| 17-2 | P0513X2017-2 | BALL BEARING 6204-2RS |
| 17-3 | P0513X2017-3 | INT RETAINING RING 47MM |
| 17-4 | P0513X2017-4 | UPPER WHEEL 17" |
| 17-5 | P0513X2017-5 | URETHANE TIRE 17" 1-PAIR |
| 18 | P0513X2018 | LOWER WHEEL ASSEMBLY |
| 18-1 | P0513X2018-1 | BUSHING |
| 18-2 | P0513X2018-2 | BALL BEARING 6204-2RS |
| 18-3 | P0513X2018-3 | INT RETAINING RING 47MM |
| 18-4 | P0513X2018-4 | LOWER WHEEL 17" |
| 18-5 | P0513X2018-5 | URETHANE TIRE 17" 1-PAIR |
| 21 | P0513X2021 | WHEEL FLAT WASHER 8MM |
| 22 | P0513X2022 | CAP SCREW M8-1.25 X 16 |
| 23 | P0513X2023 | SAW BLADE 131.5" X 1/2" 6TPI HOOK |
| 24 | P0513X2024 | LOCK WASHER 8MM |
| 25 | P0513X2025 | CAP SCREW M8-1.25 X 20 |
| 28 | P0513X2028 | LOWER WHEEL ASSEMBLY |
| 29 | P0513X2029 | HEX NUT 1-14 |
| 30 | P0513X2030 | LOCK WASHER 1" |
| 31 | P0513X2031 | MOTOR CORD 14G 3W |
| 32 | P0513X2032 | COMPRESSION SPRING 7 X 8 X 90 |
| 33 | P0513X2033 | ROLL PIN 3 X 16 |
| 34 | P0513X2034 | ALIGNMENT PLATE |
| 35 | P0513X2035 | THRUST BEARING 51201 |
| 36 | P0513X2036 | 2-BUTTON START/STOP SWITCH |
| 37 | P0513X2037 | TENSION HANDWHEEL |
| 38 | P0513X2038 | TENSION ADJUSTING ROD |
| 39 | P0513X2039 | FLANGE SCREW M5-.8 X 10 |
| 40 | P0513X2040 | EXT TOOTH WASHER 5MM |
| 41 | P0513X2041 | HEX NUT M5-.8 |
| 42 | P0513X2042 | FLANGE SCREW M5-.8 X 16 |
| 43 | P0513X2043 | SWITCH BACK PLATE |
| 44 | P0513X2044 | CAP SCREW M8-1.25 X 16 |
| 45 | P0513X2045 | FENDER WASHER 8MM |
| 46 | P0513X2046 | UPPER WHEEL SLIDING BRACKET |
| 47 | P0513X2047 | CAP SCREW M8-1.25 X 50 |
| 48 | P0513X2048 | STEEL BLIND RIVET 3 X 13MM |
| 49 | P0513X2049 | CAP SCREW M6-1 X 10 |
| 50 | P0513X2050 | CLEAR WINDOW |
| 55A | P0513X2055A | UPPER WHEEL COVER ASSY |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 55 | P0513X2055 | UPPER WHEEL COVER |
| 56 | P0513X2056 | HEX BOLT M6-1 X 25 |
| 57 | P0513X2057 | FLAT WASHER 6MM |
| 58 | P0513X2058 | WHEEL BRUSH |
| 59 | P0513X2059 | CAP SCREW M6-1 X 25 |
| 60 | P0513X2060 | STAR KNOB |
| 61 | P0513X2061 | LOCK NUT M6-1 |
| 62 | P0513X2062 | STRAIN RELIEF 16MM STRAIGHT LT |
| 63 | P0513X2063 | HEIGHT POINTER |
| 64 | P0513X2064 | HEX NUT M8-1.25 |
| 65 | P0513X2065 | HEX BOLT M8-1.25 X 90 |
| 66 | P0513X2066 | STAR KNOB BOLT M10-1.5 X 20 |
| 67 | P0513X2067 | STAR KNOB BOLT M10-1.5 X 55 |
| 68 | P0513X2068 | THREADED HANDLE M10-1.5 |
| 69 | P0513X2069 | CAM |
| 70 | P0513X2070 | PILLOW BLOCK |
| 71 | P0513X2071 | HANDLE M12-1.75 |
| 72 | P0513X2072 | LEVER |
| 73 | P0513X2073 | HEX NUT M12-1.75 |
| 74 | P0513X2074 | LEVER HUB |
| 75 | P0513X2075 | BUTTON HD CAP SCR M8-1.25 X 20 |
| 76 | P0513X2076 | LOCK WASHER 8MM |
| 78 | P0513X2078 | SHAFT COVER |
| 79 | P0513X2079 | SET SCREW M8-1.25 X 20 |
| 80 | P0513X2080 | HEX NUT M8-1.25 |
| 81 | P0513X2081 | LOWER WHEEL SHAFT |
| 82V2 | P0513X2082V2 | MOTOR 2HP 110V/220V 1-PH V2.01.10 |
| 82-1V2 | P0513X2082-1V2 | MOTOR FAN COVER V2.01.10 |
| 82-2V2 | P0513X2082-2V2 | MOTOR FAN V2.01.10 |
| 82-3V2 | P0513X2082-3V2 | S CAPACITOR 300M 250V 1-1/2 X 2-3/8 V2.01.10 |
| 82-4V2 | P0513X2082-4V2 | S CAPACITOR COVER V2.01.10 |
| 82-5V2 | P0513X2082-5V2 | R CAPACITOR 40M 250V 1-3/8 X 2-5/8 V2.01.10 |
| 82-6V2 | P0513X2082-6V2 | R CAPACITOR COVER V2.01.10 |
| 82-7V2 | P0513X2082-7V2 | MOTOR JUNCTION BOX V2.01.10 |
| 82-8 | P0513X2082-8 | CONTACT PLATE 5/8 |
| 82-9 | P0513X2082-9 | CENTRIFUGAL SWITCH 5/8-1725 |
| 82-10 | P0513X2082-10 | BALL BEARING 6203ZZ |
| 82-11 | P0513X2082-11 | BALL BEARING 6205ZZ |
| 83 | P0513X2083 | HEX BOLT M10-1.5 X 25 |
| 84 | P0513X2084 | LOCK WASHER 10MM |
| 85 | P0513X2085 | MOTOR MOUNT BRACKET |
| 86 | P0513X2086 | BUTTON HD CAP SCR M8-1.25 X 20 |
| 87 | P0513X2087 | STRAIN RELIEF PLATE 2-HOLE |
| 88 | P0513X2088 | FLANGE SCREW M5-.8 X 10 |
| 89 | P0513X2089 | PILLOW BLOCK |
| 90 | P0513X2090 | KEY 5 X 5 X 35 |
| 91 | P0513X2091 | HEX BOLT M8-1.25 X 20 LH |
| 92 | P0513X2092 | MOTOR PULLEY TYPE-A 3.5" |
| 93 | P0513X2093 | V-BELT A42 |
| 94 | P0513X2094 | CAP SCREW M6-1 X 10 |
| 95A | P0513X2095A | LOWER WHEEL COVER |
| 97 | P0513X2097 | FENDER WASHER 8MM |
| 111 | P0513X2111 | CAP SCREW M6-1 X 20 |
| 119 | P0513X2119 | LOCK WASHER 4MM |
G0513 Series Bandsaws (Mfd. Since 08/22)
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
-87-
G0513X2 Fence Assembly & Table
| REF | PART # | DESCRIPTION |
|---|---|---|
| 121 | P0513X2121 | FENCE ASSEMBLY |
| 121-1 | P0513X2121-1 | FRONT RAIL 640MM |
| 121-2 | P0513X2121-2 | ADJUST BASE |
| 121-3 | P0513X2121-3 | FIXED SHAFT |
| 121-4 | P0513X2121-4 | SHAFT |
| 121-5 | P0513X2121-5 | SPRING PIECE |
| 121-6 | P0513X2121-6 | LOCKING HANDLE M8-1.25 X 44 |
| 121-7 | P0513X2121-7 | CAST IRON FENCE 590MM |
| 121-8 | P0513X2121-8 | FLAT WASHER 8MM |
| 121-9 | P0513X2121-9 | FENCE HANDLE M8-1.25 X 22 |
| 121-10 | P0513X2121-10 | RAIL PAD |
| 121-11 | P0513X2121-11 | CONVEX WINDOW |
| 121-12 | P0513X2121-12 | CAP SCREW M6-1 X 24 |
| 121-13 | P0513X2121-13 | LOCK BLOCK |
| 121-14 | P0513X2121-14 | REAR RAIL 640MM |
| 121-15 | P0513X2121-15 | HEX NUT M8-1.25 |
| 121-16 | P0513X2121-16 | FLANGE SCREW M4-.7 X 6 |
| 121-17 | P0513X2121-17 | GUARD PIECE |
| 121-18 | P0513X2121-18 | MOVING PLATE |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 121-19 | P0513X2121-19 | PLUG |
| 121-20 | P0513X2121-20 | TAP SCREW M3.5 X 8 |
| 121-21 | P0513X2121-21 | FENCE SCALE 18-1/2" |
| 121-22 | P0513X2121-22 | HEX NUT M6-1 |
| 121-23 | P0513X2121-23 | LOCK WASHER 6MM |
| 121-24 | P0513X2121-24 | CAP SCREW M6-1 X 16 |
| 121-25 | P0513X2121-25 | HEX BOLT M6-1 X 20 |
| 121-26 | P0513X2121-26 | FLANGE BOLT M4-.7 X 8 |
| 121-27 | P0513X2121-27 | FLAT WASHER 6MM |
| 121-29 | P0513X2121-29 | SPACER PLATE |
| 126 | P0513X2126 | TABLE 17" X 24" |
| 127 | P0513X2127 | TABLE INSERT |
| 128 | P0513X2128 | TABLE PIN |
| 152 | P0513X2152 | MITER GAUGE ASSY |
| 350 | P0513X2350 | RESAW FENCE ASSEMBLY |
| 350-1 | P0513X2350-1 | ALUMINUM RESAW FENCE 590MM |
| 350-2 | P0513X2350-2 | TAP SCREW 3.5 X 8 |
| 350-3 | P0513X2350-3 | FENCE END PLATE 148 X 22 X 1 |
-88- BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. G0513 Series Bandsaws (Mfd. Since 08/22)
G0513X2 Labels
| REF | PART # | DESCRIPTION |
|---|---|---|
| 201 | P0513X2201 | MODEL NUMBER LABEL |
| 202 | P0513X2202 | GRIZZLY LOGO PLATE |
| 203 | P0513X2203 | OPEN DOOR LABEL |
| 205 | P0513X2205 | SCALE DIRECTIONS LABEL |
| 206 | P0513X2206 | SAFETY GLASSES LABEL |
| 208 | P0513X2208 | READ MANUAL LABEL |
| 209 | P0513X2209 | ELECTRICITY LABEL |
| 210 | P0513X2210 | EXTREME SERIES PLATE |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 211 | P0513X2211 | DISCONNECT POWER LABEL |
| 213 | P0513X2213 | TOUCH-UP PAINT, GRIZZLY PUTTY |
| 214 | P0513X2214 | TENSION ADJ LABEL |
| 215 | P0513X2215 | TOUCH-UP PAINT, GRIZZLY GREEN |
| 216V2 | P0513X2216V2 | MACHINE ID LABEL V2.09.18 |
| 217 | P0513X2217 | GRIZZLY.COM LABEL |
| 218 | P0513X2218 | GUIDE POST ADJUST LABEL |
| 219 | P0513X2219 | GUIDE POST LOCK LABEL |
WARNING Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -89-
G0513X2BF Main
-90- BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
G0513X2BF Main Parts List
| REF | PART # | DESCRIPTION |
|---|---|---|
| 2 | P0513X2BF002 | SET SCREW M6-1 X 10 |
| 3 | P0513X2BF003 | BUSHING |
| 4 | P0513X2BF004 | LIFTING EYE BOLT M10-1.5 |
| 5 | P0513X2BF005 | MACHINE BODY |
| 7 | P0513X2BF007 | BUSHING |
| 8 | P0513X2BF008 | FLAT WASHER 6MM |
| 10 | P0513X2BF010 | HEX NUT M6-1 |
| 11 | P0513X2BF011 | POINTER |
| 12 | P0513X2BF012 | STEP SCREW M4-.7 X 5 |
| 13 | P0513X2BF013 | HINGE SHAFT |
| 14 | P0513X2BF014 | ROLL PIN 5 X 35 |
| 15 | P0513X2BF015 | UPPER WHEEL SHAFT HINGE |
| 16 | P0513X2BF016 | UPPER WHEEL SHAFT |
| 17 | P0513X2BF017 | UPPER WHEEL ASSEMBLY |
| 17-1 | P0513X2BF017-1 | BUSHING |
| 17-2 | P0513X2BF017-2 | BALL BEARING 6204-2RS |
| 17-3 | P0513X2BF017-3 | INT RETAINING RING 47MM |
| 17-4 | P0513X2BF017-4 | UPPER WHEEL 17" |
| 17-5 | P0513X2BF017-5 | URETHANE TIRE 17" 1-PAIR |
| 18 | P0513X2BF018 | LOWER WHEEL ASSEMBLY |
| 18-1 | P0513X2BF018-1 | BUSHING |
| 18-2 | P0513X2BF018-2 | BALL BEARING 6204-2RS |
| 18-3 | P0513X2BF018-3 | INT RETAINING RING 47MM |
| 18-4 | P0513X2BF018-4 | LOWER WHEEL 17" |
| 18-5 | P0513X2BF018-5 | URETHANE TIRE 17" 1-PAIR |
| 19 | P0513X2BF019 | MAG SWITCH ASSY SDE MPE-18 220V |
| 19-1 | P0513X2BF019-1 | CONTACTOR SDE MA-18 220V |
| 19-2 | P0513X2BF019-2 | OL RELAY SDE RA-20 8-12A |
| 19-3 | P0513X2BF019-3 | MAG SWITCH COVER ASSEMBLY |
| 19-4 | P0513X2BF019-4 | CONTROL CORD 16G 5W V2.05.11 |
| 19-5 | P0513X2BF019-5 | MOTOR CORD 14G 5W |
| 19-6 | P0513X2BF019-6 | PHLP HD SCR M5-.8 X 10 |
| 21 | P0513X2BF021 | WHEEL FLAT WASHER 8MM |
| 22 | P0513X2BF022 | CAP SCREW M8-1.25 X 16 |
| 23 | P0513X2BF023 | SAW BLADE 131.5" X 1/2" 6TPI HOOK |
| 24 | P0513X2BF024 | LOCK WASHER 8MM |
| 25 | P0513X2BF025 | CAP SCREW M8-1.25 X 20 |
| 28 | P0513X2BF028 | WHEEL PULLEY/BRAKE DRUM |
| 29 | P0513X2BF029 | HEX NUT 1-14 |
| 30 | P0513X2BF030 | LOCK WASHER 1" |
| 31 | P0513X2BF031 | CONTROL PANEL PLATE |
| 32 | P0513X2BF032 | COMPRESSION SPRING 7 X 8 X 90 |
| 33 | P0513X2BF033 | ROLL PIN 3 X 16 |
| 34 | P0513X2BF034 | ALIGNMENT PLATE |
| 35 | P0513X2BF035 | THRUST BEARING 51201 |
| 36 | P0513X2BF036 | TAP SCREW M4 X 10 |
| 37 | P0513X2BF037 | TENSION HANDWHEEL |
| 38 | P0513X2BF038 | TENSION ADJUSTING ROD |
| 39 | P0513X2BF039 | FLANGE SCREW M5-.8 X 10 |
| 40 | P0513X2BF040 | STOP BUTTON |
| 41 | P0513X2BF041 | START BUTTON |
| 44 | P0513X2BF044 | CAP SCREW M8-1.25 X 16 |
| 45 | P0513X2BF045 | FENDER WASHER 8MM |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 46 | P0513X2BF046 | UPPER WHEEL SLIDING BRACKET |
| 47 | P0513X2BF047 | CAP SCREW M6-1 X 25 |
| 48 | P0513X2BF048 | STEEL BLIND RIVET 3 X 13MM |
| 49 | P0513X2BF049 | CAP SCREW M6-1 X 10 |
| 50 | P0513X2BF050 | CLEAR WINDOW |
| 51 | P0513X2BF051 | KEY SWITCH |
| 55A | P0513X2BF055A | UPPER WHEEL COVER ASSY |
| 55 | P0513X2BF055 | UPPER WHEEL COVER |
| 56 | P0513X2BF056 | HEX BOLT M6-1 X 25 |
| 57 | P0513X2BF057 | FLAT WASHER 6MM |
| 58 | P0513X2BF058 | WHEEL BRUSH |
| 59 | P0513X2BF059 | CAP SCREW M6-1 X 25 |
| 60 | P0513X2BF060 | STAR KNOB |
| 61 | P0513X2BF061 | LOCK NUT M6-1 |
| 62 | P0513X2BF062 | STRAIN RELIEF 16MM STRAIGHT LT |
| 63 | P0513X2BF063 | HEIGHT POINTER |
| 64 | P0513X2BF064 | HEX NUT M8-1.25 |
| 65 | P0513X2BF065 | HEX BOLT M8-1.25 X 90 |
| 66 | P0513X2BF066 | STAR KNOB BOLT M10-1.5 X 20 |
| 67 | P0513X2BF067 | STAR KNOB BOLT M10-1.5 X 53 |
| 68 | P0513X2BF068 | THREADED HANDLE M10-1.5 |
| 69 | P0513X2BF069 | CAM |
| 70 | P0513X2BF070 | PILLOW BLOCK |
| 71 | P0513X2BF071 | HANDLE M12-1.75 |
| 72 | P0513X2BF072 | LEVER |
| 73 | P0513X2BF073 | HEX NUT M12-1.75 |
| 74 | P0513X2BF074 | LEVER HUB |
| 75 | P0513X2BF075 | BUTTON HD CAP SCR M8-1.25 X 20 |
| 76 | P0513X2BF076 | LOCK WASHER 8MM |
| 78 | P0513X2BF078 | SHAFT COVER |
| 79 | P0513X2BF079 | SET SCREW M8-1.25 X 20 |
| 80 | P0513X2BF080 | HEX NUT M8-1.25 |
| 81 | P0513X2BF081 | LOWER WHEEL SHAFT |
| 82 | P0513X2BF082 | MOTOR 2HP 220V 1-PH W/BRAKE |
| 82-2 | P0513X2BF082-2 | MOTOR FAN COVER |
| 82-3 | P0513X2BF082-3 | MOTOR FAN |
| 82-4 | P0513X2BF082-4 | CAPACITOR COVER |
| 82-5 | P0513X2BF082-5 | R CAPACITOR 45M 450V 2 X 2-1/2 |
| 82-6 | P0513X2BF082-6 | MOTOR JUNCTION BOX |
| 82-9 | P0513X2BF082-9 | MAGNETIC BRAKE YZG |
| 82-10 | P0513X2BF082-10 | BRAKE SHOE |
| 82-14 | P0513X2BF082-14 | BALL BEARING 6205ZZ |
| 82-15 | P0513X2BF082-15 | BALL BEARING 6203ZZ |
| 83 | P0513X2BF083 | HEX BOLT M10-1.5 X 25 |
| 84 | P0513X2BF084 | LOCK WASHER 10MM |
| 85 | P0513X2BF085 | MOTOR MOUNT BRACKET |
| 86 | P0513X2BF086 | BUTTON HD CAP SCR M8-1.25 X 20 |
| 87 | P0513X2BF087 | STRAIN RELIEF PLATE 1-HOLE |
| 88 | P0513X2BF088 | TAP SCREW M4 X 10 |
| 89 | P0513X2BF089 | PILLOW BLOCK |
| 90 | P0513X2BF090 | KEY 5 X 5 X 35 |
| 91 | P0513X2BF091 | HEX BOLT M8-1.25 X 20 LH |
| 92 | P0513X2BF092 | MOTOR PULLEY TYPE-A 3.5" |
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -91-
G0513X2BF Main Parts List
| REF | PART # | DESCRIPTION |
|---|---|---|
| 93 | P0513X2BF093 | V-BELT A42 |
| 94 | P0513X2BF094 | CAP SCREW M6-1 X 10 |
| 95 | P0513X2BF095 | LOWER WHEEL COVER |
| 97 | P0513X2BF097 | FENDER WASHER 8MM |
| 111 | P0513X2BF111 | CAP SCREW M6-1 X 20 |
| 119 | P0513X2BF119 | LOCK WASHER 8MM |
| 171 | P0513X2BF171 | FLANGE SCREW M5-.8 X 10 |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 172 | P0513X2BF172 | CORD CLIP 5/16" |
| 173 | P0513X2BF173 | FLANGE SCREW M5-.8 X 50 |
| 174 | P0513X2BF174 | PHLP HD SCR M4-.7 X 10 |
| 175 | P0513X2BF175 | EXT TOOTH WASHER 5MM |
| 177 | P0513X2BF177 | JUNCTION BOX |
| 178 | P0513X2BF178 | WIRE NUT 14-22G |
G0513X2BF Labels
| REF | PART # | DESCRIPTION |
|---|---|---|
| 201 | P0513X2BF201 | MODEL NUMBER LABEL |
| 202 | P0513X2BF202 | NAMEPLATE-LARGE |
| 203 | P0513X2BF203 | DON'T OPEN DOOR LABEL |
| 204 | P0513X2BF204 | GUARD ADJUSTMENT LABEL |
| 205 | P0513X2BF205 | SCALE DIRECTIONS LABEL |
| 206 | P0513X2BF206 | GLASSES/RESPIRATOR LABEL |
| 207 | P0513X2BF207 | DISCONNECT POWER LABEL |
| 208 | P0513X2BF208 | READ MANUAL LABEL |
| 209 | P0513X2BF209 | ELECTRICITY LABEL |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 213 | P0513X2BF213 | TOUCH-UP PAINT, GRIZZLY PUTTY |
| 214 | P0513X2BF214 | TENSION ADJ LABEL |
| 215 | P0513X2BF215 | TOUCH-UP PAINT, GRIZZLY GREEN |
| 216V2 | P0513X2BF216V2 | MACHINE ID LABEL V2.10.18 |
| 219 | P0513X2BF219 | MAGNETIC BRAKE LABEL |
| 220 | P0513X2BF220 | EXTREME SERIES PLATE |
| 221 | P0513X2BF221 | GRIZZLY.COM LABEL |
| 222 | P0513X2BF222 | GUIDE POST LOCK LABEL |
WARNING
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-92- BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. G0513 Series Bandsaws (Mfd. Since □□/□□)
G0513X2 & G0513X2BF Guides & Trunnions
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -93-
G0513X2 & G0513X2BF
Guides & Trunnions Parts List
| REF | PART # | DESCRIPTION |
|---|---|---|
| 98 | P0513X2098 | CAP SCREW M10-1.5 X 35 |
| 103 | P0513X2103 | LOCK WASHER 10MM |
| 104 | P0513X2104 | FLAT WASHER 10MM |
| 136 | P0513X2136 | CAP SCREW M5-.8 X 10 |
| 137 | P0513X2137 | FLAT WASHER 5MM |
| 138 | P0513X2138 | UPPER BLADE GUARD |
| 139V2 | P0513X2139V2 | CAP SCREW M10-1.5 X 35 |
| 140 | P0513X2140 | STEP SCREW M4-.7 X 5 |
| 141 | P0513X2141 | FIBER WASHER 5MM |
| 142 | P0513X2142 | SLIDING PLATE |
| 145 | P0513X2145 | GUIDE POST ASSEMBLY |
| 145-1 | P0513X2145-1 | SET SCREW M5-.8 X 5 |
| 145-2 | P0513X2145-2 | CAP SCREW M6-1 X 16 |
| 145-3 | P0513X2145-3 | PHLP HD SCR M4-.7 X 10 |
| 145-4 | P0513X2145-4 | HEX NUT M4-.7 |
| 145-5 | P0513X2145-5 | RACK |
| 145-6 | P0513X2145-6 | GUIDE POST |
| 145-7 | P0513X2145-7 | LOCK COLLAR |
| 145-8 | P0513X2145-8 | THREADED BUSHING V2.06.09 |
| 145-9 | P0513X2145-9 | LOCK WASHER 8MM |
| 145-10 | P0513X2145-10 | THREADED GUIDE BRACKET 14MM V2.06.09 |
| 145-11 | P0513X2145-11 | WORM CYLINDER |
| 145-12 | P0513X2145-12 | FIXED PLATE |
| 145-13 | P0513X2145-13 | PINION GEAR 15T |
| 145-14 | P0513X2145-14 | PINION GEAR STEP BOLT |
| 145-15 | P0513X2145-15 | BRACKET COVER |
| 145-16 | P0513X2145-16 | CAP SCREW M8-1.25 X 16 |
| 145-17 | P0513X2145-17 | FLAT HD SCR M4-.7 X 8 |
| 145-18 | P0513X2145-18 | BUSHING |
| 145-19 | P0513X2145-19 | CAP SCREW M5-.8 X 12 |
| 145-20 | P0513X2145-20 | FLAT WASHER 5MM |
| 146 | P0513X2146 | GUIDE POST HANDWHEEL |
| 147 | P0513X2147 | CAP SCREW M6-1 X 20 |
| 150 | P0513X2150 | UPPER BLADE GUIDE ASSEMBLY |
| 150-1 | P0513X2150-1 | CAP SCREW M6-1 X 16 |
| 150-2 | P0513X2150-2 | UPPER GUIDE SUPPORT BLOCK |
| 150-3 | P0513X2150-3 | SET SCREW M6-1 X 10 |
| 150-4 | P0513X2150-4 | ADJUSTMENT BAR |
| 150-5 | P0513X2150-5 | UPPER BLADE GUIDE SUPPORT |
| 150-6 | P0513X2150-6 | ECCENTRIC SHAFT |
| 150-7 | P0513X2150-7 | EXT RETAINING RING 15MM |
| 150-8 | P0513X2150-8 | BALL BEARING 6202ZZ |
| 150-9 | P0513X2150-9 | HANDLE BUSHING |
| 150-10 | P0513X2150-10 | CAP SCREW M6-1 X 35 |
| 150-11 | P0513X2150-11 | UPPER SPACING SHAFT |
| 151 | P0513X2151 | LOWER BLADE GUIDE ASSEMBLY |
| 151-5 | P0513X2151-5 | LOWER BLADE GUIDE SUPPORT |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 151-6 | P0513X2151-6 | CAP SCREW M6-1 X 16 |
| 151-7 | P0513X2151-7 | ECCENTRIC SHAFT |
| 151-8 | P0513X2151-8 | EXT RETAINING RING 15MM |
| 151-9 | P0513X2151-9 | BALL BEARING 6202ZZ |
| 151-10 | P0513X2151-10 | HANDLE BUSHING |
| 151-11 | P0513X2151-11 | CAP SCREW M6-1 X 35 |
| 155 | P0513X2155 | CAST IRON TRUNNION ASSEMBLY |
| 155-1 | P0513X2155-1 | FLAT WASHER 8MM |
| 155-2 | P0513X2155-2 | LOCK NUT M8-1.25 |
| 155-3 | P0513X2155-3 | PHLP HD SCR M4-.7 x 6 |
| 155-4 | P0513X2155-4 | GEAR PLATE |
| 155-5 | P0513X2155-5 | FLAT HD SCR M4-.7 X 6 |
| 155-6 | P0513X2155-6 | CARRIAGE BOLT M8-1.25 X 85 |
| 155-7 | P0513X2155-7 | CAST IRON TRUNNION |
| 155-8 | P0513X2155-8 | CARRIAGE BOLT M8-1.25 X 80 |
| 155-9 | P0513X2155-9 | LOCK HANDLE M8-1.25 |
| 155-10 | P0513X2155-10 | TABLE TILT SCALE |
| 155-11 | P0513X2155-11 | FLAT WASHER 8MM |
| 155-12 | P0513X2155-12 | HEX BOLT M8-1.25 X 25 |
| 155-13 | P0513X2155-13 | LOCK HANDLE M8-1.25 |
| 155-14 | P0513X2155-14 | FLAT WASHER 4MM |
| 155-15 | P0513X2155-15 | POINTER |
| 155-16 | P0513X2155-16 | LOCK WASHER 8MM |
| 155-17 | P0513X2155-17 | ADJUSTMENT KNOB BOLT M6-1 |
| 155-18 | P0513X2155-18 | HEX NUT M6-1 |
| 155-19 | P0513X2155-19 | L-BRACKET |
| 155-20V2 | P0513X2155-20V2 | FLAT HD SCR M5-.8 X 8 |
| 155-21 | P0513X2155-21 | CAP SCREW M6-1 X 16 |
| 155-22 | P0513X2155-22 | CAP SCREW M6-1 X 50 |
| 155-23 | P0513X2155-23 | TRUNNION SUPPORT BRACKET |
| 155-24 | P0513X2155-24 | TRUNNION GEAR |
| 155-25 | P0513X2155-25 | BUTTON HD CAP SCR M10-1.5 X 30 |
| 155-26 | P0513X2155-26 | RIGHT GUARD |
| 155-27 | P0513X2155-27 | BALL BEARING 6000ZZ |
| 155-28 | P0513X2155-28 | FLAT WASHER 10MM |
| 155-29 | P0513X2155-29 | LEFT GUARD |
| 155-30 | P0513X2155-30 | ADJUSTMENT ROD |
| 155-31 | P0513X2155-31 | LOCK WASHER 8MM |
| 155-32 | P0513X2155-32 | CAP SCREW M5-.8 X 6 |
| 155-33 | P0513X2155-33 | LOCK WASHER 10MM |
| 352 | P0513X2352 | FLAT WASHER 8MM |
| 353 | P0513X2353 | LOCK WASHER 8MM |
| 354 | P0513X2354 | BUTTON HD CAP SCR M8-1.25 X 20 |
| 355 | P0513X2355 | HEX WRENCH 5MM |
| 356 | P0513X2356 | HEX WRENCH 8MM |
| 357 | P0513X2357 | WRENCH 10 X 13 OPEN-END |
-94-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G0513X2BF Fence Assembly & Table
| REF | PART # | DESCRIPTION |
|---|---|---|
| 126 | P0513X2BF126 | TABLE 17" X 24" |
| 127 | P0513X2BF127 | TABLE INSERT |
| 128 | P0513X2BF128 | TABLE PIN |
| 152 | P0513X2BF152 | MITER GAUGE ASSY |
| 153 | P0513X2B153 | KNOB SCREW M8-1.25 X 20 |
| 154 | P0513X2B154 | OUTER RAIL PLATE |
| 156 | P0513X2BF156 | RESAW FENCE ASSEMBLY |
| 156-1 | P0513X2BF156-1 | ALUM RESAW FENCE 508MM |
| 156-2 | P0513X2BF156-2 | TAP SCREW 3.5 X 8 |
| 156-3 | P0513X2BF156-3 | FENCE END PLATE 148 X 22 X 1 |
| 157 | P0513X2BF157 | FENCE ASSEMBLY |
| 157-1 | P0513X2BF157-1 | FENCE |
| 157-2 | P0513X2BF157-2 | POINTER |
| 157-3V2 | P0513X2BF157-3V2 | SET SCREW M8-1.25 X 25 |
| 157-4 | P0513X2BF157-4 | SPRING PIECE |
| 157-5 | P0513X2BF157-5 | FLANGE SCREW M4-.7 X 8 |
| 157-6 | P0513X2BF157-6 | PIVOT BLOCK |
| 157-7 | P0513X2BF157-7 | HEX NUT M8-1.25 |
| 157-8 | P0513X2BF157-8 | FENCE LOCK HANDLE |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 157-9 | P0513X2BF157-9 | SHAFT |
| 157-10 | P0513X2BF157-10 | PLASTIC SET SCREW M7-1 X 10 |
| 157-11 | P0513X2BF157-11 | NYLON PAD |
| 157-12 | P0513X2BF157-12 | SET SCREW M8-1.25 X 12 |
| 157-13 | P0513X2BF157-13 | HEX NUT M8-1.25 |
| 157-14V2 | P0513X2BF157-14V2 | HEX BOLT M8-1.25 X 20 |
| 157-15 | P0513X2BF157-15 | HEX NUT M8-1.25 |
| 157-16 | P0513X2BF157-16 | FLAT WASHER 8MM |
| 157-17V2 | P0513X2BF157-17V2 | HANDLE M8-1.25 X 45 V2.05.11 |
| 157-18 | P0513X2BF157-18 | MOVING PLATE |
| 158 | P0513X2BF158 | FLAT WASHER 8MM |
| 159 | P0513X2BF159 | LOCK WASHER 8MM |
| 160 | P0513X2BF160 | CAP SCREW M8-1.25 X 20 |
| 161 | P0513X2BF161 | FRONT RAIL |
| 161-1 | P0513X2BF161-1 | FENCE SCALE |
| 162 | P0513X2BF162 | INNER RAIL PLATE |
| 163 | P0513X2BF163 | FLAT WASHER 6MM |
| 164 | P0513X2BF164 | LOCK WASHER 6MM |
| 165V2 | P0513X2BF165 | CAP SCREW M6-1 X 20 |
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
-95-
G0513X2BF Foot Brake
| REF | PART # | DESCRIPTION |
|---|---|---|
| 301 | P0513X2BF301 | CONDUIT GROMMET |
| 302 | P0513X2BF302 | FLEXIBLE CONDUIT 1/2" X 42" |
| 303 | P0513X2BF303 | SWITCH CORD 16G 2W |
| 304 | P0513X2BF304 | HEX NUT 4MM |
| 305 | P0513X2BF305 | BRAKE SWITCH SHINOZAKI AZ7141 |
| 306 | P0513X2BF306 | PHLP HD SCR M4-.7 X 30 |
| 307 | P0513X2BF307 | CORD CLIP 5/8" |
| 308 | P0513X2BF308 | TAP SCREW M4 X 8 |
| 309 | P0513X2BF309 | BUSHING |
| 310 | P0513X2BF310 | FLAT WASHER 8MM |
| 311 | P0513X2BF311 | LOCK WASHER 8MM |
| 312 | P0513X2BF312 | CAP SCREW M8-1.25 X 25 |
| 313 | P0513X2BF313 | CAP SCREW M6-1 X 25 |
| 314 | P0513X2BF314 | LOCK WASHER 6MM |
| 315 | P0513X2BF315 | BRAKE SHOE |
| 316 | P0513X2BF316 | BUSHING |
| 317 | P0513X2BF317 | CAP SCREW M6-1 X 16 |
| 318 | P0513X2BF318 | HEX NUT M6-1 |
| 319 | P0513X2BF319 | LOCK WASHER 6MM |
| 320 | P0513X2BF320 | BRAKE PEDDLE |
| 321 | P0513X2BF321 | NYLON PAD |
| 322 | P0513X2BF322 | BRAKE EXTENSION SPRING |
| 323 | P0513X2BF323 | HEX NUT M6-1 |
| 324 | P0513X2BF324 | STEP BOLT M7-1 X 10 W/BUSHING |
| 325 | P0513X2BF325 | BRAKE LEVER |
| 326 | P0513X2BF326 | RUBBER CLIP |
-96-
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
WARRANTY & RETURNS
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly's sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. In no event shall Grizzly's liability under this warranty exceed the purchase price paid for the product and any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special, or consequential damages arising from the use of our products.
The manufacturers reserve the right to change specifications at any time because they constantly strive to achieve better quality equipment. We make every effort to ensure that our products meet high quality and durability standards and we hope you never need to use this warranty.
In the event you need to use this warranty, contact us by mail or phone and give us all the details. We will then issue you a "Return Number," which must be clearly posted on the outside as well as the inside of the carton. We will not accept any item back without this number. Proof of purchase must accompany the merchandise.
Please feel free to write or call us if you have any questions about the machine or the manual.
Thank you again for your business and continued support. We hope to serve you again soon.
To take advantage of this warranty, you must register it at https://www.grizzly.com/forms/warranty, or you can scan the QR code below to be automatically directed to our warranty registration page. Enter all applicable information for the product.
grizzly.com®
TOOL WEBSITE
Buy Direct and Save with Grizzly® – Trusted, Proven and a Great Value!
Since 1983
Visit Our Website Today For Current Specials!
ORDER 24 HOURS A DAY! 1-800-523-4777
VISA MasterCard DISCOVER NOVUS AMERICAN EXPRESS
