On Thu, 22 Oct 2015 20:34:52 -0500, email@example.com wrote:
Those are used where you do not have a neutral available.
The neutral is derived through the load. The code now requires a
neutral it switch locations with a few exceptions. It is basically
where you can add one later without disturbing the building finish.
The 2 wire timers and occupancy sensors work fine with an
incandescent. There is no real net waste since that current would be
going down the neutral anyway.
It is a MA or less but the capacitors in a LED or CFL will store that
up and make them flash acting as a relaxation oscillator.
On 10/22/2015 9:34 PM, firstname.lastname@example.org wrote:
•Up to 48 ON/OFF events per day
•No neutral required
•Self learning, repeats first 24 hour ON/OFF pattern if not programmed
•"Random" setting turns light ON and OFF at slightly different times
•15 minute memory guard protects against power failure
EJ351 Single Pole 120 VAC, 60 Hz 40-500 Watts
For use with Standard or Decorator Style Switch Plate
4 3/16" H x 1 3/4" W x 2" D 32ºF to 104ºF (0ºC to 40ºC) 1 Year
HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.