Millers Falls Cat. No. SP666 Model B 1/2" impact wrench parts diagram???

[dpb]

Looking for same; can't seem to find anything online. Anybody know of anywhere where there's a repository of old Millers Falls doc's?

Thanks for any leads...

[Dean Hoffman]

Would this help?

leads to old tool heaven.

[dpb]

Some interesting history and lists of catalogs, etc., but apparently no actual tool datasheets, unfortunately...

[Dean Hoffman]

We used to buy parts for our impact wrenches and drills at the local TruValue store. I don't have the foggiest idea if it was just that store or the TruValue chain. It's now an Ace Hardware for whatever reason. I don't remember if they would get parts for any brand or just the brands they sold.

[dpb]

Followup -- success!!!!

Nothing but a broken lead to one of the brushes. It's a very old (as is obvious being the Millers Falls brand) style w/ the rotating brushes to control the direction instead of a reversing switch. On peculiarity is that the switch has a pair of contacts that make/break power and another than make continuity of the cord neutral and the second brush return path. This had been bypassed sometime long ago and the two connected directly by a wire nut. That set of closed contacts and the two stubs of wire confused the issue for a while as to what was going on which is why was looking for a wiring diagram.

But, finally opened the switch to see that indeed those two contacts were deliberately shorted and not a switch failure and then all made sense...