Maytag MDB6000AWW JetClean
Machine runs through the wash cycle fine and pumps out the water. There is no water in the machine for the rinse cycle. Any suggestions?
Dave
Maytag dishwasher not rinsing
Jun 13, 2004
1 Replies
Someone should check to see if there's power at the water fill valve when it should be filling. If there's power but no fill, the valve may be defective and need to be replaced.
You can read about the water valves used on appliances at the following link:
formatting link
You can see a picture of the fill valve used on your dishwasher model at this link.
formatting link
It is not uncommon for water valves to work once or twice then their solenoid coil opens after the valve is in use a while.
Dan O.
- Appliance411.com
formatting link
=Ð~~~~~~
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required