Copper pipes newly painted with Dulux Quick Dry Satinwood showing green

Relatively new central heating pipes installed 12 months ago just painted with Dulux Quick Dry Satinwood paint appearing pale green three days after painting. Looks unwise to have used this water-based paint; obviously the copper has oxidised and verdisgris is showing under the paint.
Advice please. Do I strip it all back to metal and repaint using oil-based primer and top coats? Will the oxidisation continue if left and overcoated with a coat of radiator or standard oil-based paint? (I won’t say where the advice came from to used water-based paint, and I admit to being a bit of a wally by putting myself in this position!)
Reply to
Ken Earney
The verdisgris is from the flux used to solder the copper, it keeps cleaning and the copper fights back. They should be stripped, squeaky cleaned (literally) and even lightly sanded. Otherwise, no special nor particular paint is needed. I've seen very many that were painted with the regular latex paint that was used on the walls decades ago and it's all still solid.
Reply to
Anonymous

Site Timeline Threads

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.