Latest threads in Woodworking Forumshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
Installing Blum (European) Cabinet Hinges
| bookcases plus a set of kitchen cabinets. I'm interested in pointers | and particularly comments about using the Ecodrill or other similar | fixtures. | | Thanks, | | Bill I used a cheap small drill...
18
|
16 years ago
|
18 | |
|
|
Angled dovetail done with bandsaw?
I'm looking to make a drawer where the front is not square to the sides. In other words one side of the drawer is longer than the other. It's going to be about a 15 degree angle off from 90. I...
1
|
16 years ago
|
1 | |
|
|
varnish over shellac
I am building a drop down desk. At this stage I have applied a seal coat (1 lb cut) of shellac (not dewaxed). I was planning to use shellac on the whole cabinet (walnut). Now I am thinking of using...
4
|
16 years ago
|
4 | |
|
|
Skilsaw brand saws
I have a 30+ year old saw. I broke the blade guard on my saw last weekend. I do not see a model number on it anywhere. Is there anyone who could give me info on how to get a replacement part. Thanks...
8
|
16 years ago
|
8 | |
|
|
WoodSmith
While I am sucking up all your band width ;~) Channel 8, 1:30 p.m. Saturday March 22, the Wordsmith Magazine TV show. Oddly the Channel 8 web site claims that the show has been on since early...
16
|
16 years ago
|
16 | |
|
|
Ridgid TS 36->6<-0!
Well, got the saw unpacked, getting it unpacked in the back of a Grand Cherokee when it's turned on its side (had something else in the GC so there wasn't room to put it flat) wasn't fun, but I...
21
|
16 years ago
|
21 | |
|
|
Seek online pix of wood grain for aok and beech
Where online can I view detailed pictures which show the wood grain, patterning and colour? I'm interested in flat panels of beech and oak. (Google and Google Images aren't very helpful.)
7
|
16 years ago
|
7 | |
|
|
board foot rule
I'm looking for a rule (not a ruler :-) ) that lumberyards frequently use to calculate the number of bd ft in a board. It's 18" to 2' long, and has a metal hook at one end. The hook serves a dual...
20
|
16 years ago
|
20 | |
|
|
Delta T2 fence on Craftsman TS
I have been using my Craftsman table saw with the stock Align-a-Rip fence for a few years now. Just recently I did a tune-up on the saw (which is another story altogether), and found that the fence is...
4
|
16 years ago
|
4 | |
|
|
How it really works
http://www.comics.com/webmail/ViewStrip?key=59913855-2be4af1c0a-FF
—
|
16 years ago
|
— | |
|
|
Sanding swirl marks
I had an older model of the Porter Cable 5" random orbit sander that finally bit the dust a year of so ago. Great sander, never left swirl marks on anything. Since then, I have bought and cursed at...
18
|
16 years ago
|
18 | |
|
|
Want to know the information about the colleges. and also want to know
Want to know the information about the colleges. and also want to know the wonteful new courses please visit... http://collegecorners.googlepages.com
—
|
16 years ago
|
— | |
|
|
Radial arm saw table clamp
I have recently come into an older Craftsman RAS without a table or clamps, which I will be using for 90 degree crosscuts only. Since the table will have to be rebuilt, I will need new table clamps....
9
|
16 years ago
|
9 | |
|
|
Am On A Lucky Streak
Back in the mid 80's I won a CB radio base station and antena in one of those store "fill in a form and win a ____". Haven't won anything since - until recently. I did manage to walk under a 12KV...
6
|
16 years ago
|
6 | |
|
|
Humidor question
I have a cigar humidor that the wife bought me some years ago. It no longer will hold humidity. The outer laminate is peeling off in places, so I'm thinking it probably is leaking. As this was an...
—
|
16 years ago
|
— |