Terminology needed - conduit and fittings

electrical elbow?

at my house where the cable exits the house they use a rubbery putty to keep out the rainwater and ants. run your cable down a bit before nailing a cable clip.

formatting link
mcmelectronics.com search for cable clip and look at the ones for your wire which is probable RG-6. at

Reply to
buffalobill
Loading thread data ...

Greetings. I'm trying to search for what I need for a small project, but I can't seem to find the right terminology, plus, if I give a description of what I'm doing, possibly you good people will have a better solution.

Nearly a year ago I had DirecTV installed, and the installer drilled a hole through the siding in through the drywall to feed in the coax. He explained that with a basic install, nothing fancy can be expected. Well, at the time it wasn't really a problem, even though it's the front of the house. I just removed some large bushes from in front of the house and find that the coax is completely exposed and hanging from the hole that was drilled, across the ground, and runs around the corner of the house to the back where the splitter is. First, it looks ugly, second, anyone who had a malicious thought could snip that coax, and there goes my directv.

I don't really want to push the coax back through the sealed hole in order to run it through a conduit, along with some sort of housing that could screw into the siding where the hole is, and I've got the problem solved with flexible split conduit, but can't seem to find a housing or something with a 90 degree angle to place over the hole that can be connected to the flexible conduit. What would something like that be called?

TIA

Reply to
S. Shaw

You could also mount a small electrical box to the side of the house and mount the conduit to the box. Drill a small hole from the box to the inside of the house and fill it with silicon to keep the creepy crawlers out.

I could never figure out why the idiot cable persons run the cable down the front of the house. Take it to the side and run the cable on the inside along the baseboard if possible.

Rich

Reply to
evodawg

Time = Money

Reply to
Edwin Pawlowski

Yeah and crap is crap

Reply to
evodawg

But it is a "free" installation. You get what you pay for.

Reply to
Edwin Pawlowski

Yes, but everyone thinks walmart today and wants cheeep. So you get what you pay for.

Reply to
George

I guess, sure glad my customers don't feel that way. They're use to good quality and willing to pay for it. And I enjoy the compliments!!!! But then again I only work for folks that are. High end folks with money are a joy to work for never really question what you're doing but know what they like. And the money is good!! I deserve it though.

Rich

Reply to
evodawg

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.