Woodworking Forum

  1. Home
  2. Woodworking Forum
51629 Threads Posts
to

Worth reading in Woodworking Forum

Help with coat rack

Greetings, I am planning to make a simple coat rack. I intend to make it out of black walnut and turn the pegs for hang...
4 comments posted 20yrs
posted by claypot
4 comments posted 20yrs posted by claypot

Layout on Dark Wood?

Group, I need to lay out reference marks for placing templates on wenge, and for marking the ends of stopped router cut...
13 comments posted 20yrs
posted by none
13 comments posted 20yrs posted by none

Table saw alignment shift as blade lowers

I've discovered my blade goes about .005 out of parallel with the miter groove as it is lowered from an ALMOST fully ra...
6 comments posted 20yrs
posted by m9er
6 comments posted 20yrs posted by m9er

What tool do I need to make a door close again?

I have a few doors that seem to have expanded this winter and won't close properly, or open easily, they just get stuck...
22 comments posted 20yrs
posted by casioculture
22 comments posted 20yrs posted by casioculture

Cubby bench

I am looking for plans for an entrance way bench with cubby holes under the bench for storage baskets. similar to the o...
5 comments posted 20yrs
posted by javaist
5 comments posted 20yrs posted by javaist

forrest blades and their sharpening service

Any opinions on Forrest blades or their sharpening service? I've had blades sharpened locally but they never seem to be...
24 comments posted 20yrs
posted by x
24 comments posted 20yrs posted by x

Springback when steam bending?

OK, so I'm contemplating my first excursion into steam bending, and I'm having a *lot* of trouble determining how much...
11 comments posted 20yrs
posted by spambait
11 comments posted 20yrs posted by spambait

Exterior wipe-on oil

I'm refinishing a small drop leaf table I made for SWMBO to put outdooors. I tried Minwax Helmsman clear satin which lo...
4 comments posted 20yrs
posted by xxamiller37xx
4 comments posted 20yrs posted by xxamiller37xx

Objective Router Bit Testing?

I'm confused. Are router bits supposed to be resharpened, like saw blades? Or are the disposable? I'm in the market for...
14 comments posted 20yrs
posted by JayPique
14 comments posted 20yrs posted by JayPique

How to Layout Inset Drawers

I am building a buffet with 6 inset drawers of QSW Oak. They will slide on wooden drawer supports. The drawers are grad...
3 comments posted 20yrs
posted by foster.239
3 comments posted 20yrs posted by foster.239

handsaw recutting in UK

Can anyone recommend somewhere that knows how to do this properly? My local places all just send them away somewhere, &...
4 comments posted 20yrs
posted by graham
4 comments posted 20yrs posted by graham

Sanding a perfect circle on a disk sander

Some time ago, on the DIY network I think, I saw a jig being used on a disk/belt sander to sand a perfect circle (agains...
7 comments posted 20yrs
posted by jtpryan
7 comments posted 20yrs posted by jtpryan

ensuring router bit is parelle on table

x-no-archive:yes I have a new router table (ryobi). I had to mount the router directly to the table. (The mounting adap...
6 comments posted 20yrs
posted by stryped
6 comments posted 20yrs posted by stryped