Last year I painted my new staircase without treating the knots with knotting solution. Now the knows are bleeding thro.
If I repaint the wood, how should I treat the knots?
Do I need to strip back to bare wood and treat them with knotting solution, or is there something that I can put over the existing paint, before repainting?
I don't know for sure, but if it were me I'd strip back to bare wood. In fact it IS me in a way beacuse I hung 8 new doors last year and had a mini-production line going for knotting and painting. On one door I completely forgot the knotting and it's bleeding through already. So I plan to strip back to wood over the knots, apply knotting, reapply paint, feathering and sanding until I've made it look as good as I can. When I get time... after all the other stuff has been done...
Redrow failed to treat any or the internal woowork with knotting. As I am redecorating, I am applying knotting over the original paintwork with a generous overlap and 2 years on there is no sign of bleeding
Malcolm
thanks
Crikey, and you're not even posting from Google.
How did you get on the Mailgate server?
By the way, you only need to strip back the patches which are knotty. Scrape it back, wipe it with turps (to stop it clogging the sandpaper) and sand it to feather the paintwork in, apply a layer of laquer (knotting is french polish) then paint to suit.
I registered with Mailgate about 3 years ago..
What else do you do, Mr. Zarb? Play bagpipes? Brew beer? Do DIY? Collect stamps? Study? Without context, you see, it's very difficult to know what you are talking about!
Have something to add? Share your thoughts — no account required.
Ask the community — no account required