I've got one of these washing machines (Servis Millenium M3510s) and yesterday the drive belt snapped. All well and good, went out and bought a new one. However, when I took the back off the machine the old belt had grabbed a load of the wiring in it's death throws and wound it onto the motor spindle. Result: I can see which wires go roughly where as the spade pins were bent in the process, but I can't tell exactly which pin each wire goes onto!!!
The two areas where wires have come off are the thermostat at the bottom of the drum and the small unit right up where the power lead comes in.
So if anyone has access to a wiring diagram, or a photo of the insides of one of these machines I would be eternally grateful.
Cheers,
Mark
[mark_*/underscore*/_begbie_*/at*/_hotmail_*/dot*/_com]