I wanted to turn the cold water supply off today but found that the stopcock in the kitchen has seized up - It has always been stiff but now it will only turn about 1/8th of a turn and will not off or on. I have put some plusgas on the spindle but can not get it to turn any more.
Unfortunately the body of the tap is virtually inaccessible since the kitchen was refitted (in the far corner under fitted base units)and I cannot get to the attached drain c*ck either. This means the tap is going to be very difficult to replace if this proves necessary. I hope that someone might have an idea as to an easier solution. Please!
John