Scanners with slide scanning attachments are not so expensive nowadays. I have an Epson Perfection 1650 which cost only just over £100 and scans slides pretty well (it'll also scan colour negatives). You can probably get something just as good for less than £100 now, it was a while ago that I bought it.
Should do...
You can fix that in photoshop....
Most digitals will run in low light - and a projected image is not that dim. One problem you may find is getting a "hot spot" - i.e. the centre of the projected image may be better lit than the edges.
You may also get a result with one of the cine to video transfer boxes. These allow you to shine a projector in one side, and point a video camera into the other for the purposes of copying from old film to video. You should not get any geometric distortion with this approach.
You can get slide copier lenses for most SLRs not sure on the availability for "ordinary" digital cameras.
For doing bulk you need a slide scanner with auto feed as you suggest. There is one caveat I would highlight though. The autofeeder I have (Nikon SF200 on a LS2000 scanner) works very well with modern slides. It is not as good with older slides in cardboard mounts, which can cause misfeeds and jams.
Fine for new photos, but does not solve the issue with the back catalogue.
AHA! Got one of those somewhere - I'll give it a try.
incorporating my
I have a Dimage Scan Dual, Mod F-2400, which I purchased years ago I haven't used it much and it's doing nothing, if you want to make an offer around £40. I'm based in North Shropshire. Regards Tom
Another solution to get slides into digital format is to re-photograph them, with a suitable back-lighter, with a digital camera. However, I do not know if such devices are available, although they were made for pentaxes and similar SLR film cameras. Providing the camera has close enough focus, it should be possible to make one. I recently had some 4 by 3 inch glass plate negatives done this way, with good results, although this with a Nikon digital camera. I also have an Epson 1670 scanner, which came with a 35mm slide and neg. attachment, good for the money - £80.
Another solution to get slides into digital format is to re-photograph them, with a suitable back-lighter, with a digital camera. However, I do not know if such devices are available, although they were made for pentaxes and similar SLR film cameras. Providing the camera has close enough focus, it should be possible to make one. I recently had some 4 by 3 inch glass plate negatives done this way, with good results, although this with a Nikon digital camera. I also have an Epson 1670 scanner, which came with a 35mm slide and neg. attachment, good for the money - £80.
Is that scsi based ? (having problems finding any info on it)
--=20 Please add "[newsgroup]" in the subject of any personal replies via email
--- My new email address has "ngspamtrap" & @btinternet.com in it ;-) ---
Is that scsi based ? (having problems finding any info on it)
Yes I think so, havn't used it for years, must find the literature on it. Tom
...I think it came out circa 1997, so if the scsi adaptor is included, it might (although probably not very likely) be an ISA card.
I`ll drop someone I know an email, he might be interested (I sort of am myself tbh, but i`m going to be incommunicado for a few weeks)
That's in Spain somewhere, isn't it?
(I'll get my coat)
On 19 Sep 2004, StephenC wrote
I had slide-duping tubes like that years ago (Minolta), but never got very good results -- second-generation images were being produced from a lens which was inferior to the original, and there was a *lot* of image loss and distortion.
Logic tells me that whilst digital is probably better, one would probably be dogged with the same problem: that is, if the lens on the camera you're using isn't superior to the one which took the original slide, you're on a losing curve, and you'll probably get better digital information from a scanner than by using a camera to do the digitising.
I have similar kit -- a Canon 3200F with a slide-scannig lamp in the lid -- and it works pretty well. The results aren't professional level, but this field is a "pays money/takes choice" thing: the only way to get if truly *good* quality slide scans is to use a dedicated slide scanner (or pay a commercial firm to do it with professional kit).
...more like in the province of Ontario :-p
You do that :-p
snip
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D\
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D/
There's a lot of different simple ways of achieving this. The main=20 problem, as someone else pointed out, is the sheer time and tedium of=20 doing the job
--=20 Paul Mc Cann
In message , Paper2002AD writes
Forget it, you'll never get it to give a decent spectrum and end up with a picture with good colour balance
Where are you?
I have a 35mm scanner, which I might let you use
In message , StephenC writes
That's the crunch part isn't it
In message , Colin Wilson writes
Yes
That's a kind offer - I'm in Telford.
In message , Paper2002AD writes
Next time I'm up in that neck of the woods (Shrewsbury) I can bring it up
email me
I`ve already emailed a colleague who might be interested
Have something to add? Share your thoughts — no account required.
Ask the community — no account required