Hi John,
How did you fix the timber insert to the flitch, did you use a glue or bolts or both?
Regards
Ian
Hi John,
How did you fix the timber insert to the flitch, did you use a glue or bolts or both?
Regards
Ian
(email sent)
This thread happened so long ago it has expired from my news server!
The quick answer is that a flitch is a steel insert in between two timber beams. Fixing together is via bolts though holes drilled right through the lot. Typically 12mm, with plate washers either side.
Other beams can then be hung from the flitch using joist hangers nailed on with square twist nails in exactly the same way as you would use them on a conventional wood beam.
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.