OT accurate time checks?

Aug 21, 2012 179 Replies
Saved reading

100% sure. I don't understand why you say it "would make more sense" since a 1024 x 768 x 75Hz monitor has a line scan frequency of 60 kHz, not 77.5 kHz.

Richard.

formatting link

There's no flicker at an 85 Hz frame rate!

Depends on what you use the monitor for. I value the colour fidelity, gamma accuracy and (particularly) temporal response of a CRT for critical assessment of the quality of video material.

Richard.

formatting link

Engineer in the BBC - or at least when I was there - referred to those who designed and repaired the equipment, etc. Operators used it - and broke it. In radio, the Studio Manager did the sound mixing - a sort of half way house between operations and production.

En el artículo , Richard Russell escribió:

Maybe not for you. I can see it.

i can see flicker on striplights at 100hz. Its all down to phiosphor persistence

It happens that Dave Plowman (News) formulated :

No not that type of engineer he was on the much bigger stuff and quite a few years ago now, so a proper engineer :')

That's extremely unlikely:

formatting link
's much more probable that the light in question had a component of flicker at 50 Hz, due perhaps to distortion of the mains waveform or some characteristic of the light itself.

Richard.

formatting link

headaches and eyestrain.[5] Individuals with high critical flicker fusion threshold are particularly affected by light from fluorescent fixtures that have magnetic ballasts: their EEG alpha waves are markedly attenuated and they perform office tasks with greater speed and decreased accuracy. The problems are not observed with electronic ballasts"

"In some cases, it is possible to indirectly detect flicker at rates well beyond 60 Hz in the case of high-speed motion, via the "phantom array" effect. Fast-moving flickering objects zooming across view (either by object motion, or by eye motion such as rolling eyes), can cause a dotted or multicolored blur instead of a continuous blur, as if they were multiple objects"

Need I go on?

A bit of gamma radiation is Good For You ;-)

That's the main reason for me to abandon CRT monitors. I still prefer a good CRT over an LCD.

A problem I have with DLP projectors that use a colour wheel. If you flick = your eyes quickly you can easily see the three colour fringes. Simon.

Nothing you have quoted (particularly not the pseudo-science) alters the fact that 100 Hz is well above the flicker fusion frequency for most people; even 75 Hz is rare. We were, you will recall, talking about CRT monitors - it was you who cited the fluorescent light as evidence that you could see 100 Hz flicker.

Whilst it's not impossible that you can genuinely detect it, I prefer to believe the more likely explanation, which is that the light had a

50 Hz component. In fact you can pretty much guarantee that any light fed from a 50 Hz supply will, and it only takes a small amount of 50 Hz to result in visible flicker. It is highly improbable that you would see any flicker on a CRT with a refresh rate of 100 Hz, or even 85 Hz.

Richard.

formatting link

So even less likely to know about operations.

Agreed. That and every LCD I've ever used has given me a headache after a short while; a *good* CRT is a lot more comfortable on the eyes I find. Plus I've always got a stack of papers balanced on the top, which I wouldn't be able to do with an LCD :-)

cheers

Jules

I'm not sure whether it's strictly Grade 1 (or even whether that is a meaningful term any more) but the Sony BVM-E250 Reference OLED HD Monitor is around the GBP 20,000 mark:

formatting link
's noteworthy that it can be a true interlaced display, emulating a CRT.

Richard.

formatting link

One major problem with LCDs is they don't give a true black, which makes setting the black level on the camera difficult. And unlike many other things, crushed blacks can't be sorted in post production.

CRT monitors were still in use much later than 2006 on location.

Tad Racist there, Dave?

It happens that Moonraker formulated :

Curiosity aroused, I have been searching for a Windows util which can simply compare several NTP timeservers against each other and the PC's clock. I particularly wanted to compare time.windows.com to some others, as that is suggested to be of lesser accuracy. I have found no excessive inaccuracy in that server, while I have been logging it.

I came across this.

NTP monitor V5.1.4

formatting link

Couldn't you have just looked out the window, then?

In article , Harry Bloomfield scribeth thus

One must ask why the need for such precision at home for most applications when the SWMBO wants the clocks 5 mins fast anyway;?...

tony sayer formulated the question :

No absolute need for it, just a matter of curiosity.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required