Multiway socket blocks - autoswitching

All one essentially needs is a relay and some wire. Cut the wire off the relay coil and rewind using thick wire. Now put the relay coil in series with the PC's mains feed, and use the relay contacts to switch the live that goes to the peripherals.
You could enclose it inside one of those 6 way socket strips, cutting one of the strips to give the 2 separate circuits. Then to use it you plug PC into the first socket, and that controls power to the others.
Regards, NT
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
Add image file
Upload is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.