Large Barn window Help

Apr 08, 2013 2 Replies
R

Hi



I have just had installed a large arched single double glazed upvc unit, ground floor into stone wall


2410 wide 875mm high to curved section they n further 295mm in the curve (so its oblong with curved corners and top.


The issue i have is that when its windy it creaks and make a squeeky kind of sound, same when you gently push the glass either internally or externally.


The glass is Pilks KS Optiwgite TUFF Swisspacer white Argon (copied from spec sheet)


Can anyone tell me what thickness of glass should have been used and what be causing the noise



Thanks for any help offered robin


Vote
Twitter Facebook LinkedIn
H

I think you need to determine where the movement is. Likely the draught seals rubbing on the frame If the window is opening, maybe some silicon spray lubricant along where the draught seals make contact with the frame.

Also lubricate any hinges/lock mechanism. The lock mechanism might need adjusting to tighten things up a bit. There is a sort of adjustable cam arrangement on most window locks.

I don't think there will be any problem with your glass.

Vote
Twitter Facebook LinkedIn
N

Generally agree but could be between glass and seals even for a fixed light. I'd try silicone spray here too. I'd guess the glass should be reasonably thick at that size: maybe 4 or 6 mm?

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required