ANYTHING mechanical will supper strain on joints from thermal cycling, up to and including integrated circuits.
Remember the boiler itself will lose a lot of heat to the room its in.
ANYTHING mechanical will supper strain on joints from thermal cycling, up to and including integrated circuits.
Remember the boiler itself will lose a lot of heat to the room its in.
We dont know what the op's pipe layout is, it could be cheap or could be impractical.
NT
We dont know the op's plumbing layout. It may be as simple as adding valves, or it may need added pipework.
One sole existing zone can be subdivided after the event.
Exchanger bulk and modulation both affect efficiency.
NT
Just a random thought.... If there's gas available on site, and an external wall, why not install a small balanced flue gas heater in the room you want to heat?
I've seen caravan sized ones of about three kilowatts that can be thermostatically controlled and re-jetted for natural gas.
Just leave it, I'm sure he's perfectly happy with life on fantasy island. I hear the west coast is particularly nice.
No prices, though. You could probably buy several years electricity to heat the OP's room for what it costs.
Give me an example of how.
You could cut off one room quite easily. But cutting off the rest of the house while leaving on that room is the tricky thing. Think about it.
Indeed, the cost is about £3500!
Long Johns under trousers save a lot of heating costs!
and somehow warm your feet [g]
En el artículo , Jeremy Nicoll - news posts escribió:
I've got a wall-mounted electric heater (modern, glass fronted, pebbles) in the lounge with a living-flame effect. It's odd how the flames make me feel warmer even though the heater itself isn't switched on.
A lot of it is psychological, I think.
En el artículo , Huge escribió:
Me too. Fan heaters are very quick to take the chill off a room.
En el artículo , Andrew Gabriel escribió:
Deliberately, or because the system is overloaded?
En el artículo , Huge escribió:
^^^^^^^^
An idiot who can't get his story straight, it seems.
Maybe that was sixty five? Asylums for the perpetually bewildered can be quite large.
Those damned corpses.
T
rote:
nonsense. Stuch strain only occurs where the design doesnt avoid it.
how to add valves without adding pipework? That cant be what you mean.
Where do you see difficulty? Pipework layout or control system? Neither are mentally challenging to make work. Whether more pipe is needed depends on existing pipework layout.
NT
That will be normal temperatures, short term, in the order of 30 minute, overload temperatures are about 150 deg C
That'll be why you don't see many crows perching on them!
make that *300* minutes
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.