Extending wiring

Hi,

I need to move a couple light switches and plugs in a bedroom as I am putting up a partition wall to split it into two rooms.

Obviously there are many ways to join new lengths of wire to the existing to make them reach their new location... But what is the legal (building regs) and safe way of doing this?

Tom

Reply to
Thomarse
Loading thread data ...

Crimps.

Or possibly twist solder and heatshrink.

Anything with screws has to be accessible. Blah Blah.

However lots of people use a bakelite connectoir block thing - junction box- and lose it where the BCO can't see it.

Chocolate block is probably a nono, although if well taped up its actually pretty safe.

Reply to
The Natural Philosopher

For joints in places where they will be accessible then a junction box is fine. For a concealed joint (say one you will plaster over) you need to use another method. Of those allowed crimping is the usual option chosen:

formatting link

Reply to
John Rumm

"Thomarse" wrote

Best way - strip out to source and replace with longer unbroken/unjointed cable. Failing that, crimps/junction box as others have advised. If using new cable for either case, don't forget warning sticker on consumer unit about differing colours in use.

Phil

Reply to
TheScullster

How do my pressure washer & carpet cleaning FAQ's get on this wiki thingy?

Reply to
The Medway Handyman

Not seen that one before? Weeks old now ;-)

Decide what you want to call the article, and type the name into the search box. Say "Pressure washers". That will take you to a page that says "Oi, this don't exist, do you want to create it?" You say yup, it pops up an edit box and off you go.

If you create an account and login first it will mean your work is tagged with you account name, otherwise it will just get your IP address. There are a few extra toy available if you register an account.

You can paste straight text in if you want. You can add photos etc, and you can format the stuff to a greater or lesser degree depending on how much fiddling you want to do. This article is a good starting point:

formatting link
that, find an article in there that has the layout you want, and click edit on it to see the raw text. You can then copy any things you want to do to your own.

Reply to
John Rumm

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.