Hello i m fitting a kitchen and need to know what i need to lower a cooker socket. because its in the way for the kitchen units to be fitted. its the wire which needs to be extended. can it be extended using a junction box? thanks jason
Cooker Socket
Jan 17, 2004
1 Replies
What direction do the wires come from to the cooker unit ? It is easier to move along the cable, making it shorter really, until you get the cooker unit to a position that is out of the way of your kitchen units.
To extend the cable would really mean putting in a proper box and blanking plate with proper connections inside to take the heavy cable that is needed to run you stove. There are cooker connectors that have all the necessary connections inside, but this too would be in the way if you position it in the same spot as the original cooker unit, unless you sink it below the surface of the plaster and make sure it is properly protected against people banging nails and screws through it.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required