How many blades per inch ?
Do you do pushfit ?
How many blades per inch ?
Do you do pushfit ?
After only a year or so a new 'insult'. The 'plantpot' has been retired?
Interesting that in both he has to invent words...
Maxie, how do you know Adam likes it rough? Wow! What a man! What man! To think Maxie is a fan of Jim Reeves as well. Amazing.
Maxie, my God it is all coming out now. Maxie has been hiding it all this time. Maxie a in frock up a tree:
Now it all fits. I know why, it is your ways that is the problem.
Maxie you have to reconcile your ways with normal behaviour applicable to our society.
Please f*ck off as you are a plantpot.
What a confused man. I wonder what Maxie thinks about this.
Hungover? Usually 'eff' off.
Do you have these phrases on a hot key?
Perhaps you could change them as often as you do your favourite boiler... choice
Please f*ck off as you are a plantpot.
One thing I've oft wondered - why the 'please'? Did your mommy tell you always to be polite? And what went wrong?
He's just showing due deference to his superiors, i.e. everyone on the face of the planet.
Please f*ck off as you are a plantpot.
This pervo needs tagging.
And all other fauna
Beg, doggy, beg.
Fantastic Maxie! What a quip! What a man. Only a known man like yourself, who does things, could come up with such a quip.
This pervo needs tagging.
Interesting. It was the failure of the fan that made me use their repair service!
Is there anything to help preserve the life of the fan btw?
Yeah - turn the boiler off
otherwise, no
It comes down to the quality of the bearings and the location in the boiler
The guy from W-B advised me never to turn the boiler off as the fan or pump may seize.
In message , Mark writes
It preserves the life of the fan if you never switch it on
The pump can seize because of limescale in the bearing - this can normally be overcome by undoing the big screw in the end (on a grundfos) and turning the shaft manually.
Modern boiler controls tweak the pumps testicles on a daily basis to prevent this happening
As for the fan - he was talking bollocks
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.