Hand and Power Tools

  1. Home
  2. Hand and Power Tools
314 Threads Posts
to

Air compressor popping the circuit

Hey all, I have a Porter Cable 150 PSI air compressor. The manual states that it should be used on a 20-amp circuit but...
2 comments posted 22yrs
posted by noone
2 comments posted 22yrs posted by noone

replacing sprayer hose at kitchen sink

Hi all, Ours is leaking where the hose is attached to the spray nozzle. Wouldn't the best way be to replace the whole ho...
1 comments posted 22yrs
posted by scullycat
1 comments posted 22yrs posted by scullycat

Makita DC1411 NiMH Charger

Does anyone know where I can get a schematic for this unit to repair it? Thanks
0 comments posted 22yrs
posted by robert.harvey
0 comments posted 22yrs posted by robert.harvey

Black&Decker battery charger

The battery charger for my Firestorm drill and saw died and I can't seem to find a replacement on the market. The tools...
0 comments posted 22yrs
posted by tony
0 comments posted 22yrs posted by tony

Belt sander recommendations?

My old B&D 3x24 belt sanders have both finally worn out (drive gears and no spare parts available any more). These have...
3 comments posted 22yrs
posted by dp_bozarth
3 comments posted 22yrs posted by dp_bozarth

website for power tool review?

Is there a website that has reviews on power tools? I am considering buying a Craftsman drill press and bench grinder, b...
0 comments posted 22yrs
posted by daxt
0 comments posted 22yrs posted by daxt

Roofing staples too shallow?

I have a 4-year old house with composition shingles (Pabco 30 year warranty shingles). Three times large sections of sh...
15 comments posted 22yrs
posted by fzbruss
15 comments posted 22yrs posted by fzbruss

air compressor power supply

I have a Sears 2 hp 12 gallon air compressor approximately 20 years old. It is setup for 110 service. I have an unused 2...
6 comments posted 22yrs
posted by mj.baker
6 comments posted 22yrs posted by mj.baker

FS: Mini Laser Levels

"Picture Perfect" Laser Level. This is a mini version of the larger and pricey laser beam levelers that are seen on TV...
0 comments posted 22yrs
posted by roger
0 comments posted 22yrs posted by roger

Fabrication

I have a Craftsman, three tier professional tool box with grip latch bearings. I am interested in expanding the size of...
0 comments posted 22yrs
posted by tberlin
0 comments posted 22yrs posted by tberlin

Computer Tool Kits for Network Techs

Tools for Networking and Computer Service http://www.forpctechs.com/store=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= LAN CAT 5E T...
0 comments posted 22yrs
posted by better1
0 comments posted 22yrs posted by better1

FS: Cool Tool

Perfect tool for General, Electronic and/or Computer repair. 9 Tools in 1 !! THREE for the price of ONE!!! Check them o...
0 comments posted 22yrs
posted by roger
0 comments posted 22yrs posted by roger

Dynamic brake for old Dewalt saw

I've acquired an old (about 1960) Dewalt radial arm saw. (Price was right.) The thing is, the blade spins pretty long w...
4 comments posted 22yrs
posted by scott_dallmeyer
4 comments posted 22yrs posted by scott_dallmeyer

The "MicroSoft" Patch Post

For those who may not be aware, which I assume there are few, but these supposed Microsoft patches and the .zip files a...
0 comments posted 22yrs
posted by tberlin
0 comments posted 22yrs posted by tberlin

Vintage Tools

Anyone in the NG know of any sites with vintage tools, particularly with images, and not so much woodworking tools. Als...
0 comments posted 22yrs
posted by tberlin
0 comments posted 22yrs posted by tberlin