9 discussions on HomeOwnersHub about the Jet JDP-17MF: what owners asked, what went wrong, and what fixed it.
I have a 30 year old Rockwell 36" bench top radial drill press. I have had it for 30 years. I do not use it as much as I did in the past although I did recently design, build, and post pictures of a new DP table that I attached to...
I've got a Delta 12" drill press (11-990) with a min speed of 620 rpm.I've got a 3 1/2" hole saw that I want to use in the drill press, butit's max speed is 140 rpm. I've called Delta and they don't have anyother pulley arrangements that...
I recently bought a used Rockwell bandsaw, which had been refittedwith a Baldor 1 hp motor, that was set up to run on 220V. I was toldthat I could rewire it to run on 110V, which is all I have in mygarage. The saw ran on 220v when I...
Well, I decided to take the plunge and upgrade the ol' Craftsman benchdrill press with a real one. I've seen, and liked, the Steel City unitand am planning on buying it as soon as the local store gets more stockafter Christmas. The...
May be replacing my Delta 17-990 drill press.The run out is terrible and the service guy spent 3 hours trying toremedy the situation to no avail. On top of which, he found a lot ofbolts/nuts loose.Extraordinarily disappointing for what...
Today my Delta DP 350 broke. Can't wait a week or two getting it fixed. I need a DP like, tomorrow. Is there anything I can buy at HD, Lowes, Sears, that doesn't cost a bunch that I might have any luck with? I'm looking for $150-200.00. I...