SECTION 8: WIRING
These pages are current at the time of printing. However, in the spirit of improvement, we may make changes to the electrical systems of future machines. Compare the manufacture date of your machine to the one stated in this manual, and study this section carefully.
If there are differences between your machine and what is shown in this section, call Technical Support at (570) 546-9663 for assistance BEFORE making any changes to the wiring on your machine. An updated wiring diagram may be available. Note: Please gather the serial number and manufacture date of your machine before calling. This information can be found on the main machine label.
WARNING
Wiring Safety Instructions
SHOCK HAZARD. Working on wiring that is connected to a power source is extremely dangerous. Touching electrified parts will result in personal injury including but not limited to severe burns, electrocution, or death. Disconnect the power from the machine before servicing electrical components!
MODIFICATIONS. Modifying the wiring beyond what is shown in the diagram may lead to unpredictable results, including serious injury or fire. This includes the installation of unapproved aftermarket parts.
WIRE CONNECTIONS. All connections must be tight to prevent wires from loosening during machine operation. Double-check all wires disconnected or connected during any wiring task to ensure tight connections.
CIRCUIT REQUIREMENTS. You MUST follow the requirements at the beginning of this manual when connecting your machine to a power source.
WIRE/COMPONENT DAMAGE. Damaged wires or components increase the risk of serious personal injury, fire, or machine damage. If you notice that any wires or components are damaged while performing a wiring task, replace those wires or components.
MOTOR WIRING. The motor wiring shown in these diagrams is current at the time of printing but may not match your machine. If you find this to be the case, use the wiring diagram inside the motor junction box.
CAPACITORS/INVERTERS. Some capacitors and power inverters store an electrical charge for up to 10 minutes after being disconnected from the power source. To reduce the risk of being shocked, wait at least this long before working on capacitors.
EXPERIENCING DIFFICULTIES. If you are experiencing difficulties understanding the information included in this section, contact our Technical Support at (570) 546-9663.
NOTICE
The photos and diagrams included in this section are best viewed in color. You can view these pages in color at www.grizzly.com.
COLOR KEY
| BLACK | BLUE | YELLOW | LIGHT BLUE |
|---|---|---|---|
| Bk | Bl | Yl | Lb |
| WHITE | BROWN | YELLOW GREEN | BLUE WHITE |
|---|---|---|---|
| Wt | Br | Yg | Bw |
| GREEN | GRAY | PURPLE | TURQUOISE |
|---|---|---|---|
| Gn | Gy | Pu | Tu |
| RED | ORANGE | PINK |
|---|---|---|
| Rd | Or | Pk |
G1021X2 Wiring Diagram
CONTROL PANEL (viewed from behind)
START 22 21 14 13
STOP 13 14 21 22
POWER X2 X1
Ground
SDE MA-18 240V L1/1 L2/3 L3/5 NO13 NC21 SDE NC22 T1/2 T2/4 T3/6 NO14 RA-20 AMP 18 12 ARC 15 96 98
MAGNETIC SWITCH ASSEMBLY SDE MPE-18
WARNING! SHOCK HAZARD! Disconnect power before working on wiring.
NOTICE The motor wiring shown here is current at the time of printing, but it may not match your machine. Always use the wiring diagram inside the motor junction box.
Hot 230 VAC Hot G 6-20 Plug Ground
MOTOR (230V) GND
Start Capacitor 400uF 125VAC
Run Capacitor 70uF 250VAC
-52- STOP READ ELECTRICAL SAFETY ON PAGE 51!
G1021X2 Electrical Components
Figure 69. G1021X2 magnetic switch with cover removed.
Figure 70. G1021X2 motor junction box.
Figure 71. G1021X2 control panel.
STOP READ ELECTRICAL SAFETY ON PAGE 51! ⚡ -53-
G1021Z Wiring Diagram
WARNING! SHOCK HAZARD! Disconnect power before working on wiring.
NOTICE The motor wiring shown here is current at the time of printing, but it may not match your machine. Always use the wiring diagram inside the motor junction box.
-54- STOP READ ELECTRICAL SAFETY ON PAGE 51!
G1021Z Electrical Components
Figure 72. G1021Z magnetic switch with cover removed.
Figure 73. G1021Z motor junction box.
STOP READ ELECTRICAL SAFETY ON PAGE 51! -55-
SECTION 9: PARTS
We do our best to stock replacement parts when possible, but we cannot guarantee that all parts shown are available for purchase. Call (800) 523-4777 or visit www.grizzly.com/parts to check for availability.
G1021X2 Main
-56- BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
G1021X2 Main Parts List
| REF | PART # | DESCRIPTION |
|---|---|---|
| 1 | P1021X2001 | KNOB 5/16-18, D1-3/4, ROUND |
| 2V2 | P1021X2002V2 | BELT/PULLEY COVER V2.05.18 |
| 3V2 | P1021X2003V2 | V-BELT M58 3L580 V2.05.18 |
| 4 | P1021X2004 | STANDOFF-HEX MM 5/16-18 X 3/8, 3 |
| 5 | P1021X2005 | FLANGE BOLT M6-1 X 12 |
| 6 | P1021X2006 | BELT/PULLEY GUARD |
| 7 | P1021X2007 | FLAT WASHER 5/16 |
| 8 | P1021X2008 | HEX NUT 5/16-18 |
| 9 | P1021X2009 | HEX BOLT M8-1.25 X 20 |
| 10 | P1021X2010 | FENDER WASHER 8 X 30 X 4MM |
| 11 | P1021X2011 | CUTTERHEAD PULLEY |
| 13 | P1021X2013 | UPPER COVER |
| 15V2 | P1021X2015V2 | FLANGE BOLT M6-1 X 12 |
| 17 | P1021X2017 | CAP SCREW M6-1 X 20 |
| 18 | P1021X2018 | RETURN ROLLER BRACKET |
| 19 | P1021X2019 | KEY 4 X 4 X 10 |
| 20 | P1021X2020 | HANDWHEEL TYPE-3 151D X 10B-K X 3/8-16 |
| 21 | P1021X2021 | CHIP BREAKER |
| 22 | P1021X2022 | FLAT WASHER 10MM |
| 23 | P1021X2023 | HEX NUT M10-1.25 |
| 24 | P1021X2024 | REVOLVING HANDLE 1 X 3-9/16, 3/8-16 X 1/2 |
| 25 | P1021X2025 | CHIP DEFLECTOR |
| 26 | P1021X2026 | HEX BOLT M6-1 X 12 |
| 28 | P1021X2028 | FLAT SPRING 84 X 46 X 0.6MM |
| 29 | P1021X2029 | TENSIONING SET SCREW M22-1.5 X 20 |
| 30 | P1021X2030 | SPACER 8.2 X 22 X 3MM |
| 31 | P1021X2031 | CHAIN TENSIONER |
| 32 | P1021X2032 | SHOULDER BOLT M8-1.25 X 14, 4 X 12 |
| 33 | P1021X2033 | IDLER WHEEL |
| 34 | P1021X2034 | IDLER SHAFT |
| 35 | P1021X2035 | ROLL PIN 6 X 20 |
| 36V2 | P1021X2036V2 | DRIVE CHAIN COVER V2.05.18 |
| 37 | P1021X2037 | CAP SCREW M8-1.25 X 50 |
| 38 | P1021X2038 | SET SCREW M6-1 X 16 |
| 39 | P1021X2039 | EXTENSION SPRING 1 X 8.5 X 33 |
| 40 | P1021X2040 | SPRING BRACKET |
| 41 | P1021X2041 | BALL BEARING 6205-2RS |
| 42 | P1021X2042 | CAP SCREW M6-1 X 10 |
| 43 | P1021X2043 | KEY 8 X 8 X 36 |
| 44V2 | P1021X2044V2 | HELICAL CUTTERHEAD 15" V2.05.18 |
| 46 | P1021X2046 | SET SCREW M10-1.5 X 12 |
| 47 | P1021X2047 | SET SCREW M8-1.25 X 12 |
| 48 | P1021X2048 | COMPRESSION SPRING 3.5 X 19.7 X 70 |
| 49 | P1021X2049 | BUSHING BLOCK |
| 50 | P1021X2050 | BUSHING BLOCK PLATE |
| 51 | P1021X2051 | HEX NUT M6-1 |
| 52 | P1021X2052 | HEAD CASTING |
| 53 | P1021X2053 | OUTFEED ROLLER |
| 54 | P1021X2054 | DEPTH LIMITER |
| 55 | P1021X2055 | FLAT HD SCR M5-.8 X 8 |
| 56 | P1021X2056 | KEY 5 X 5 X 22 |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 57V2 | P1021X2057V2 | SPROCKET 31T V2.05.18 |
| 58 | P1021X2058 | FENDER WASHER 6 X 20 X 3MM |
| 59 | P1021X2059 | HEX BOLT M6-1 X 16 |
| 60 | P1021X2060 | CHAIN 06B-1 X 63 (31 LINKS) |
| 60-1 | P1021X2060-1 | MASTER LINK |
| 61 | P1021X2061 | SPROCKET 31T |
| 63 | P1021X2063 | EXT RETAINING RING 12MM |
| 64 | P1021X2064 | CHIP BREAKER ADJUSTMENT ROD |
| 65 | P1021X2065 | CHIP BREAKER PIVOT ROD |
| 66 | P1021X2066 | HEX NUT M12-1.75 |
| 67 | P1021X2067 | E-CLIP 15MM |
| 68 | P1021X2068 | SPACER |
| 69 | P1021X2069 | ANTI-KICKBACK FINGER |
| 70 | P1021X2070 | ANTI-KICKBACK SHAFT |
| 71 | P1021X2071 | INFEED ROLLER |
| 72V2 | P1021X2072V2 | SPROCKET 31T V2.05.18 |
| 73 | P1021X2073 | CAP SCREW M6-1 X 12 |
| 74 | P1021X2074 | BALL BEARING 6204ZZ |
| 75 | P1021X2075 | GEAR 16T |
| 76 | P1021X2076 | CAP SCREW M6-1 X 25 |
| 77 | P1021X2077 | BALL BEARING 6201-2RS |
| 78 | P1021X2078 | GEAR 47T |
| 79 | P1021X2079 | GEARED SHAFT 18T |
| 80 | P1021X2080 | KEY 5 X 5 X 10 |
| 81V2 | P1021X2081V2 | GEARBOX COVER V2.05.18 |
| 82 | P1021X2082 | LOCATING PIN 8 X 7.55 X 7.95 |
| 84V2 | P1021X2084V2 | GEARED SHAFT 28T/18T V2.02.19 |
| 85 | P1021X2085 | KEY 6 X 6 X 40 |
| 86 | P1021X2086 | GEAR 71T |
| 87 | P1021X2087 | KNOB 3/8-16, D1-1/4, BALL |
| 88 | P1021X2088 | CHAIN 06B-1 X 47 (23 LINKS) |
| 88-1 | P1021X2088-1 | HALF LINK |
| 89 | P1021X2089 | SPROCKET 12T W/KEY |
| 90V2 | P1021X2090V2 | OIL PLUG 1/4 NPT X 3/4" V2.05.18 |
| 91 | P1021X2091 | OIL SEAL 28 X 40 X 8 |
| 92V2 | P1021X2092V2 | GEARBOX V2.05.18 |
| 92AV2 | P1021X2092AV2 | GEARBOX ASSEMBLY V2.05.18 |
| 93 | P1021X2093 | GASKET |
| 94V2 | P1021X2094V2 | COMBO GEAR 86T/96T V2.02.19 |
| 95 | P1021X2095 | BEARING SHAFT |
| 96 | P1021X2096 | GEAR SHAFT |
| 97 | P1021X2097 | COMPRESSION SPRING 0.6 X 5.9 X 16 |
| 98 | P1021X2098 | STEEL BALL 6MM |
| 99 | P1021X2099 | OIL SEAL 25 X 47 X 6 |
| 100 | P1021X2100 | BALL BEARING 6204ZZ |
| 101 | P1021X2101 | KEY 5 X 5 X 12 |
| 102 | P1021X2102 | SHIFTING FORK |
| 103 | P1021X2103 | SHIFTING SHAFT |
| 104 | P1021X2104 | O-RING 11.8 X 2.4 P12 |
| 108V2 | P1021X2108V2 | BALL BEARING 608ZZ V2.05.18 |
| 114 | P1021X2114 | SET SCREW M6-1 X 12 |
G1021X2/G1021Z (Mfd. Since 11/20)
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
-57-
G1021X2 Main Parts List (Cont.)
Left Table
| REF | PART # | DESCRIPTION |
|---|---|---|
| 166 | P1021X2166 | CARBIDE INSERTS 15 X 15 X 2.5MM-10 PK |
| 167 | P1021X2167 | FLAT HEAD TORX 10-32 X 1/2 |
| 169 | P1021X2169 | CAP SCREW M5-.8 X 5 |
| 171 | P1021X2171 | WORM GEAR HOUSING |
| 172 | P1021X2172 | WORM SHAFT |
| 173 | P1021X2173 | BALL BEARING 6200ZZ |
| 174 | P1021X2174 | INT RETAINING RING 30MM |
| 178 | P1021X2178 | RETURN ROLLER |
| 179 | P1021X2179 | DUST HOOD |
| 180 | P1021X2180 | FLANGE SCREW M6-1 X 12 |
Right Table
| REF | PART # | DESCRIPTION |
|---|---|---|
| 181 | P1021X2181 | CLIP-ON NUT M6-1 |
| 184 | P1021X2184 | PHLP HD SCR M4-.7 X 8 |
| 185V2 | P1021X2185V2 | CAP SCREW M8-1.25 X 10 |
| 186 | P1021X2186 | PULLEY GUARD PLATE |
| 188V2 | P1021X2188V2 | GEARBOX COVER PLATE V2.05.18 |
| 190 | P1021X2190 | FLAT WASHER 8MM |
| 191 | P1021X2191 | HEX BOLT M8-1.25 X 30 |
| 192 | P1021X2192 | LOCK WASHER 8MM |
| 204 | P1021X2204 | HANDWHEEL DIRECTION LABEL |
-58-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G1021X2 Stand & Motor
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -59-
G1021X2 Stand & Motor Parts List
| REF | PART # | DESCRIPTION |
|---|---|---|
| 12V2 | P1021X2012V2 | STRAIN RELIEF TYPE-1 7/16 V2.05.18 |
| 16V2 | P1021X2016V2 | PHLP HD SCR M6-1 X 16 |
| 45V2 | P1021X2045V2 | MAGNETIC SWITCH ASSY MPE-18 V2.05.18 |
| 45V2-1 | P1021X2045V2-1 | MAGNETIC SWITCH COVER (FRONT) |
| 45V2-2 | P1021X2045V2-2 | MAGNETIC SWITCH COVER (REAR) |
| 45V2-3 | P1021X2045V2-3 | CONTACTOR SDE MA-18 220-240V |
| 45V2-4 | P1021X2045V2-4 | OL RELAY SDE RA-20 12-18A |
| 45V2-5 | P1021X2045V2-5 | SWITCH CORD 12G 4W 79" |
| 45V2-6 | P1021X2045V2-6 | MOTOR CORD 12G 3W 33" |
| 45V2-7 | P1021X2045V2-7 | POWER CORD 12G 3W 138" 6-20P |
| 62V2 | P1021X2062V2 | SWITCH MOUNTING PLATE V2.05.18 |
| 140 | P1021X2140 | PHLP HD SCR M5-.8 X 10 |
| 141V2 | P1021X2141V2 | STAND V2.05.18 |
| 142 | P1021X2142 | MOTOR ACCESS PANEL |
| 143 | P1021X2143 | FLAT HD SCR M6-1 X 12 |
| 145 | P1021X2145 | SWITCH BOX |
| 146 | P1021X2146 | MOTOR MOUNT PLATE |
| 147 | P1021X2147 | LOCK COLLAR |
| 148 | P1021X2148 | SWITCH PLATE |
| 149V2 | P1021X2149V2 | MOTOR 3HP 230V 1-PH V2.05.18 |
| 149V2-1 | P1021X2149V2-1 | MOTOR FAN COVER |
| 149V2-2 | P1021X2149V2-2 | CAPACITOR COVER (START) |
| 149V2-3 | P1021X2149V2-3 | CAPACITOR COVER (RUN) |
| 149V2-4 | P1021X2149V2-4 | MOTOR JUNCTION BOX |
| 149V2-5 | P1021X2149V2-5 | MOTOR FAN |
| 149V2-6 | P1021X2149V2-6 | START CAP 400M 125V 1-9/16 X 3-1/2 |
| 149V2-7V2 | P1021X2149V2-7V2 | R CAP 70M 250V 1-9/16 X 3-1/2 V2.09.18 |
| 149V2-8 | P1021X2149V2-8 | CONTACT PLATE |
| 149V2-9 | P1021X2149V2-9 | BALL BEARING 6205ZZ (FRONT) |
| 149V2-10 | P1021X2149V2-10 | BALL BEARING 6203ZZ (REAR) |
| 149V2-11 | P1021X2149V2-11 | CENTRIFUGAL SWITCH |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 150 | P1021X2150 | HEX BOLT M8-1.25 X 40 |
| 151 | P1021X2151 | PLATE CONNECTING ROD |
| 152 | P1021X2152 | HEX NUT M8-1.25 |
| 153 | P1021X2153 | FLAT WASHER 10 X 28 X 3MM |
| 154 | P1021X2154 | ROD END BOLT M10-1.5 X 100, ID 16.5MM |
| 155 | P1021X2155 | START SWITCH |
| 156 | P1021X2156 | WRENCH 10 X 13MM OPEN-ENDS |
| 158 | P1021X2158 | FOOT M8-1.25 X 67, D36 |
| 159 | P1021X2159 | HEX WRENCH 6MM |
| 161 | P1021X2161 | HEX WRENCH 4MM |
| 162 | P1021X2162 | HEX WRENCH 3MM |
| 164 | P1021X2164 | WRENCH 12 X 14MM OPEN-ENDS |
| 165 | P1021X2165 | T-HANDLE TORX DRIVER T-25 |
| 176 | P1021X2176 | FRONT CABINET PANEL |
| 182 | P1021X2182 | PHLP HD SCR M4-.7 X 8 |
| 183 | P1021X2183 | EXT TOOTH WASHER 4MM |
| 187 | P1021X2187 | STOP SWITCH |
| 189 | P1021X2189 | POWER INDICATOR LIGHT 220V 22MM RED |
| 193V2 | P1021X2193V2 | SWITCH PEDESTAL V2.05.18 |
| 194 | P1021X2194 | HEX NUT M5-.8 |
| 195 | P1021X2195 | HEX BOLT M5-.8 X 10 |
| 196V2 | P1021X2196V2 | MOTOR PULLEY V2.05.18 |
| 197 | P1021X2197 | FENDER WASHER 8 X 30 X 4MM |
| 198V2 | P1021X2198V2 | HEX BOLT M8-1.25 X 25 |
| 199 | P1021X2199 | KEY 5 X 5 X 30 |
| 221 | P1021X2221 | FLANGE BOLT M6-1 X 12 |
| 222 | P1021X2222 | HEX NUT M10-1.25 |
| 223 | P1021X2223 | SPACER 8.2 X 22 X 3MM |
| 224 | P1021X2224 | HEX NUT M6-1 |
| 225 | P1021X2225 | SET SCREW M6-1 X 12 |
-60-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G1021X2 Table & Base
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -61-
G1021X2 Table & Base
| REF | PART # | DESCRIPTION |
|---|---|---|
| 14 | P1021X2014 | HEX BOLT M8-1.25 X 25 |
| 19 | P1021X2019 | KEY 4 X 4 X 10 |
| 27 | P1021X2027 | FLAT WASHER 8MM |
| 105 | P1021X2105 | EXTENSION TABLE (CAST IRON) |
| 107 | P1021X2107 | ECCENTRIC SHAFT |
| 109 | P1021X2109 | TABLE ROLLER |
| 109-1 | P1021X2109-1 | BALL BEARING 608-2RS |
| 110V2 | P1021X2110V2 | KNOB 6-LOBE M12-1.75, D53 |
| 111 | P1021X2111 | THREADED GIB |
| 112 | P1021X2112 | LOCKING ROD |
| 113 | P1021X2113 | MAIN TABLE |
| 115 | P1021X2115 | GIB |
| 116 | P1021X2116 | RIVET 2 X 5MM NAMEPLATE, COPPER |
| 117 | P1021X2117 | LEADSCREW NUT |
| 118 | P1021X2118 | LEADSCREW, SECONDARY |
| 119 | P1021X2119 | COLUMN |
| 120 | P1021X2120 | CHAIN #410 X 134 |
| 121 | P1021X2121 | EXT RETAINING RING 15MM |
| 122 | P1021X2122 | IDLER SPROCKET 10T |
| 123 | P1021X2123 | IDLER SHAFT |
| 124 | P1021X2124 | IDLER BRACKET |
| 125 | P1021X2125 | BASE |
| 126 | P1021X2126 | HEX BOLT M8-1.25 X 25 |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 127 | P1021X2127 | BALL BEARING 6202ZZ |
| 128 | P1021X2128 | INT RETAINING RING 35MM |
| 129 | P1021X2129 | SPROCKET 10T |
| 130 | P1021X2130 | SCALE COLUMN |
| 131 | P1021X2131 | SCALE |
| 132 | P1021X2132 | PHLP HD SCR M3-.5 X 6 |
| 133 | P1021X2133 | E-CLIP 12MM |
| 134 | P1021X2134 | LIFTING BAR |
| 135 | P1021X2135 | EXT RETAINING RING 10MM |
| 136 | P1021X2136 | GEAR 14T |
| 137 | P1021X2137 | INT RETAINING RING 38MM |
| 138 | P1021X2138 | SPACER |
| 139 | P1021X2139 | LEADSCREW, PRIMARY |
| 144 | P1021X2144 | HEX BOLT M8-1.25 X 45 |
| 226 | P1021X2226 | CAP SCREW M6-1 X 20 |
| 227 | P1021X2227 | FLAT WASHER 10MM |
| 228 | P1021X2228 | HEX NUT M10-1.25 |
| 229 | P1021X2229 | SPACER 8.2 X 22 X 3MM |
| 230 | P1021X2230 | SET SCREW M10-1.5 X 12 |
| 231 | P1021X2231 | SET SCREW M8-1.25 X 12 |
| 232 | P1021X2232 | SET SCREW M6-1 X 12 |
| 233 | P1021X2233 | FLAT WASHER 8MM |
-62- BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G1021X2 Labels & Cosmetics
| REF | PART # | DESCRIPTION |
|---|---|---|
| 201V2 | P1021X2201V2 | DISCONNECT POWER LABEL |
| 202V3 | P1021X2202V3 | MACHINE ID LABEL V3.02.19 |
| 205V3 | P1021X2205V3 | SHIFT GEARBOX NOTICE V3.02.19 |
| 206 | P1021X2206 | TOUCH-UP PAINT, GRIZZLY PUTTY |
| 207V2 | P1021X2207V2 | READ MANUAL LABEL |
| 208 | P1021X2208 | TOUCH-UP PAINT, GRIZZLY GREEN |
| 209 | P1021X2209 | EXTREME SERIES NAMEPLATE |
| 210 | P1021X2210 | GRIZZLY NAMEPLATE-LARGE |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 213 | P1021X2213 | ELECTRICITY LABEL |
| 215V2 | P1021X2215V2 | BELT COVER WARNING LABEL V2.05.18 |
| 216V2 | P1021X2216V2 | ADD OIL NOTICE V2.05.18 |
| 217V2 | P1021X2217V2 | MODEL NUMBER LABEL V2.05.18 |
| 218 | P1021X2218 | STOP OIL FILL TAG |
| 219 | P1021X2219 | INVENTORY SHIPPING NOTICE |
| 220 | P1021X2220 | EYE/EAR/LUNG INJURY LABEL |
WARNING
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
G1021Z Main
-64- BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store.
G1021Z Main Parts List
| REF | PART # | DESCRIPTION |
|---|---|---|
| 1 | P1021Z001 | PULLEY/BELT COVER |
| 2 | P1021Z002 | FLANGE BOLT M6-1 X 12 |
| 3V2 | P1021Z003V2 | V-BELT M58 3L580 |
| 4 | P1021Z004 | HEX BOLT M8-1.25 X 25 |
| 5 | P1021Z005 | FENDER WASHER 8 X 30 X 4MM |
| 6 | P1021Z006 | KNOB 5/16-18, D1-3/4, ROUND |
| 7 | P1021Z007 | CUTTERHEAD PULLEY |
| 9 | P1021Z009 | PULLEY GUARD PLATE |
| 10 | P1021Z010 | LOCK WASHER 8MM |
| 11 | P1021Z011 | SPROCKET 31T |
| 12 | P1021Z012 | STANDOFF-HEX MM 5/16-18 X 3/8, 3 |
| 13 | P1021Z013 | PULLEY GUARD |
| 21 | P1021Z021 | WORM GEAR HOUSING |
| 21-1 | P1021Z021-1 | RETURN ROLLER BRACKET |
| 22 | P1021Z022 | HEAD CASTING |
| 23 | P1021Z023 | CHIP DEFLECTOR |
| 25 | P1021Z025 | TENSIONING SET SCREW M22-1.5 X 20 |
| 26 | P1021Z026 | CAP SCREW M8-1.25 X 50 |
| 27 | P1021Z027 | SET SCREW M6-1 X 12 |
| 28 | P1021Z028 | FLAT SPRING 84 X 46 X 0.6MM |
| 30 | P1021Z030 | HEX NUT M10-1.25 |
| 31 | P1021Z031 | FLAT WASHER 10MM |
| 32 | P1021Z032 | REVOLVING HANDLE 1 X 3-9/16, 3/8-16 X 1/2 |
| 33 | P1021Z033 | HANDWHEEL TYPE-3 151D X 10B-K X 3/8-16 |
| 34V2 | P1021Z034V2 | INT RETAINING RING 30MM |
| 36 | P1021Z036 | SET SCREW M10-1.5 X 12 |
| 79 | P1021Z079 | CAP SCREW M6-1 X 20 |
| 87 | P1021Z087 | HEX BOLT M6-1 X 12 |
| 90 | P1021Z090 | SET SCREW M6-1 X 16 |
| 90-1 | P1021Z090-1 | HEX NUT M6-1 |
| 91 | P1021Z091 | HEX BOLT M8-1.25 X 20 |
| 92 | P1021Z092 | BUSHING BLOCK PLATE |
| 94 | P1021Z094 | SET SCREW M8-1.25 X 12 |
| 97 | P1021Z097 | UPPER COVER |
| 99 | P1021Z099 | ROLL PIN 6 X 20 |
| 100 | P1021Z100 | BALL BEARING 6205-2RS |
| 101V2 | P1021Z101V2 | KEY 8 X 8 X 36 V2.05.18 |
| 102 | P1021Z102 | CUTTERHEAD 15" 3-KNIFE |
| 103 | P1021Z103 | COMPRESSION SPRING 0.6 X 5.9 X 16 |
| 104 | P1021Z104 | GIB BOLT M8-1.25 X 10 |
| 105 | P1021Z105 | GIB |
| 106 | P1021Z106 | CHAIN TENSIONER |
| 107V2 | P1021Z107V2 | OIL PLUG 1/4 NPT X 3/4" V2.05.18 |
| 108 | P1021Z108 | OIL SEAL 28 X 40 X 8 |
| 109V2 | P1021Z109V2 | GEARBOX V2.05.18 |
| 109AV2 | P1021Z109AV2 | GEARBOX ASSEMBLY V2.05.18 |
| 110 | P1021Z110 | GASKET |
| 111 | P1021Z111 | BALL BEARING 6204ZZ |
| 112 | P1021Z112 | GEAR 16T |
| 114 | P1021Z114 | BALL BEARING 6201ZZ |
| 115 | P1021Z115 | GEAR 47T |
| 116A | P1021Z116A | KEY 5 X 5 X 12 |
| 116B | P1021Z116B | KEY 5 X 5 X 10 |
| 117 | P1021Z117 | GEARED SHAFT 18T |
| 119V2 | P1021Z119V2 | GEARED SHAFT 28T/18T V2.02.19 |
| 120 | P1021Z120 | GEAR 71T |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 121V2 | P1021Z121V2 | COMBO GEAR 86T/96T V2.02.19 |
| 122 | P1021Z122 | GEAR SHAFT |
| 123 | P1021Z123 | KEY 6 X 6 X 40 |
| 125 | P1021Z125 | OIL SEAL 25 X 47 X 6 |
| 127 | P1021Z127 | COMPRESSION SPRING 0.6 X 5.9 X 16 |
| 128 | P1021Z128 | STEEL BALL 6MM |
| 129 | P1021Z129 | SHIFTING FORK |
| 131 | P1021Z131 | SHIFTING SHAFT |
| 132 | P1021Z132 | O-RING 12 X 1.5 S12.5 |
| 133V2 | P1021Z133V2 | GEARBOX COVER V2.05.18 |
| 134 | P1021Z134 | KNOB 3/8-16, D1-1/4, BALL |
| 135 | P1021Z135 | CAP SCREW M6-1 X 25 |
| 136 | P1021Z136 | LOCATING PIN 8 X 7.55 X 7.95 |
| 137 | P1021Z137 | SPROCKET 12T W/KEY |
| 138 | P1021Z138 | FENDER WASHER 6.2 X 22 X 3 |
| 139 | P1021Z139 | HEX BOLT M6-1 X 16 |
| 140 | P1021Z140 | CHAIN 06B-1 X 47 (23 LINKS) |
| 141V2 | P1021Z141V2 | DRIVE CHAIN COVER V2.05.18 |
| 142V2 | P1021Z142V2 | CAP SCREW M8-1.25 X 10 |
| 147 | P1021Z147 | CAP SCREW M6-1 X 12 |
| 148 | P1021Z148 | FENDER WASHER 6 X 20 X 3MM |
| 149V2 | P1021Z149V2 | SPROCKET 31T V2.05.18 |
| 150 | P1021Z150 | KEY 5 X 5 X 22 |
| 151 | P1021Z151 | OUTFEED ROLLER |
| 152 | P1021Z152 | COMPRESSION SPRING 3.5 X 19.7 X 70 |
| 153 | P1021Z153 | BUSHING BLOCK |
| 154 | P1021Z154 | CHIP BREAKER |
| 155 | P1021Z155 | HEX NUT M6-1 |
| 156 | P1021Z156 | SET SCREW M6-1 X 12 |
| 157 | P1021Z157 | CHIP BREAKER ADJUSTMENT ROD |
| 159 | P1021Z159 | E-CLIP 15MM |
| 160 | P1021Z160 | SPACER |
| 161V2 | P1021Z161V2 | ANTI-KICKBACK FINGER V2.05.18 |
| 162 | P1021Z162 | ANTI-KICKBACK SHAFT |
| 163 | P1021Z163 | INFEED ROLLER |
| 164V2 | P1021Z164V2 | SPROCKET 31T V2.05.18 |
| 165A | P1021Z165A | CHAIN 06B-1 X 63 (31 LINKS) |
| 166 | P1021Z166 | KNIFE-SETTING JIG ASSEMBLY |
| 166-1 | P1021Z166-1 | E-CLIP 9MM |
| 166-2 | P1021Z166-2 | KNIFE-SETTING JIG FOOT |
| 166-3 | P1021Z166-3 | KNIFE-SETTING JIG SHAFT |
| 168V2 | P1021Z168V2 | DUST HOOD V2.05.18 |
| 170 | P1021Z170 | 15" X 1" X 1/8" HSS PLANER BLADES (3) |
| 172 | P1021Z172 | HALF LINK |
| 173 | P1021Z173 | MASTER LINK |
| 174 | P1021Z174 | DEPTH LIMITER |
| 175V2 | P1021Z175V2 | FLAT HD SCR M5-.8 X 8 |
| 176V2 | P1021Z176V2 | SPACER 8.2 X 22 X 3MM V2.05.18 |
| 177 | P1021Z177 | EXT RETAINING RING 12MM |
| 178 | P1021Z178 | CHIP BREAKER PIVOT ROD |
| 179 | P1021Z179 | HEX NUT M12-1.75 |
| 191 | P1021Z191 | CAP SCREW M6-1 X 10 |
| 194 | P1021Z194 | EXTENSION SPRING 1 X 8.5 X 33 |
| 195 | P1021Z195 | SHOULDER BOLT M8-1.25 X 14, 4 X 12 |
| 196 | P1021Z196 | SPRING BRACKET |
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -65-
G1021Z Main Parts List (Cont.)
Left Table
| REF | PART # | DESCRIPTION |
|---|---|---|
| 198 | P1021Z198 | HANDWHEEL DIRECTION LABEL |
| 206 | P1021Z206 | BEARING SHAFT |
| 207V2 | P1021Z207V2 | BALL BEARING 608ZZ V2.05.18 |
| 208 | P1021Z208 | WORM SHAFT |
| 209 | P1021Z209 | KEY 4 X 4 X 10 |
| 210 | P1021Z210 | BALL BEARING 6200ZZ |
| 211 | P1021Z211 | RETURN ROLLER |
| 219 | P1021Z219 | FLAT WASHER 5/16 |
Right Table
| REF | PART # | DESCRIPTION |
|---|---|---|
| 220 | P1021Z220 | HEX NUT 5/16-18 |
| 224 | P1021Z224 | IDLER SHAFT |
| 225 | P1021Z225 | IDLER WHEEL |
| 226 | P1021Z226 | FLAT WASHER 8MM |
| 242 | P1021Z242 | GEARBOX COVER PLATE |
| 243 | P1021Z243 | PHLP HD SCR M4-.7 X 8 |
| 244 | P1021Z244 | CLIP-ON NUT M6-1 |
-66-
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
G1021Z Stand & Motor
| REF | PART # | DESCRIPTION |
|---|---|---|
| 8 | P1021Z008 | MOTOR PULLEY |
| 16V2 | P1021Z016V2 | MOTOR 3HP 230V 1-PH V2.05.18 |
| 16V2-1 | P1021Z016V2-1 | MOTOR FAN COVER |
| 16V2-2 | P1021Z016V2-2 | CAPACITOR COVER (START) |
| 16V2-3 | P1021Z016V2-3 | CAPACITOR COVER (RUN) |
| 16V2-4 | P1021Z016V2-4 | MOTOR JUNCTION BOX |
| 16V2-5 | P1021Z016V2-5 | MOTOR FAN |
| 16V2-6 | P1021Z016V2-6 | START CAP 400M 125V 1-9/16 X 3-1/2 |
| 16V2-7V2 | P1021Z016V2-7V2 | R CAP 70M 250V 1-9/16 X 3-1/2 V2.09.18 |
| 16V2-8 | P1021Z016V2-8 | CONTACT PLATE |
| 16V2-9 | P1021Z016V2-9 | BALL BEARING 6205ZZ (FRONT) |
| 16V2-10 | P1021Z016V2-10 | BALL BEARING 6203ZZ (REAR) |
| 16V2-11 | P1021Z016V2-11 | CENTRIFUGAL SWITCH |
| 17 | P1021Z017 | MOTOR MOUNT PLATE |
| 18 | P1021Z018 | HEX BOLT M8-1.25 X 40 |
| 19V2 | P1021Z019V2 | SPACER 8.2 X 22 X 3MM V2.05.18 |
| 20 | P1021Z020 | HEX NUT M8-1.25 |
| 40V2 | P1021Z040V2 | MAGNETIC SWITCH ASSY MP-18 V2.05.18 |
| 40V2-1 | P1021Z040V2-1 | MAGNETIC SWITCH COVER (FRONT) |
| 40V2-2 | P1021Z040V2-2 | MAGNETIC SWITCH COVER (REAR) |
| 40V2-3 | P1021Z040V2-3 | CONTACTOR SDE MA-18 220-240V |
| 40V2-4 | P1021Z040V2-4 | OL RELAY SDE RA-20 12-18A |
| 41 | P1021Z041 | PLATE CONNECTING ROD |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 42 | P1021Z042 | SWITCH MOUNT BRACKET |
| 169V2 | P1021Z169V2 | CABINET STAND V2.05.18 |
| 180V2 | P1021Z180V2 | STRAIN RELIEF TYPE-1 7/16 V2.05.18 |
| 183V2 | P1021Z183V2 | POWER CORD 12G 3W 150" 6-20P V2.05.18 |
| 184 | P1021Z184 | SWITCH CORD 12G 3W 30" |
| 185 | P1021Z185 | KEY 5 X 5 X 30 |
| 186 | P1021Z186 | HEX WRENCH 3MM |
| 187 | P1021Z187 | HEX WRENCH 4MM |
| 189 | P1021Z189 | HEX WRENCH 6MM |
| 197 | P1021Z197 | WRENCH 12 X 14MM OPEN-ENDS |
| 199 | P1021Z199 | WRENCH 10 X 13MM OPEN-ENDS |
| 201 | P1021Z201 | SET SCREW M6-1 X 12 |
| 202 | P1021Z202 | HEX NUT M10-1.25 |
| 203 | P1021Z203 | FENDER WASHER 10 X 28 X 3MM |
| 204 | P1021Z204 | ROD END BOLT M10-1.5 X 100, ID 16.5MM |
| 205 | P1021Z205 | LOCK COLLAR |
| 218 | P1021Z218 | PHLP HD SCR M6-1 X 12 |
| 227 | P1021Z227 | FOOT M8-1.25 X 67, D36 |
| 228 | P1021Z228 | MOTOR ACCESS PANEL |
| 229 | P1021Z229 | FLAT HD SCR M6-1 X 12 |
| 245 | P1021Z245 | HEX BOLT M8-1.25 X 25 |
| 246 | P1021Z246 | FENDER WASHER 8 X 30 X 4MM |
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -67-
G1021Z Table & Base
-68- BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. G1021X2/G1021Z (Mfd. Since 11/20)
G1021Z Table & Base
Left Table
| REF | PART # | DESCRIPTION |
|---|---|---|
| 43 | P1021Z043 | COLUMN |
| 44 | P1021Z044 | LEADSCREW NUT |
| 45 | P1021Z045 | LEADSCREW, SECONDARY |
| 46 | P1021Z046 | KEY 4 X 4 X 10 |
| 48 | P1021Z048 | SCALE COLUMN |
| 49 | P1021Z049 | SCALE |
| 50 | P1021Z050 | PHLP HD SCR M3-.5 X 6 |
| 51 | P1021Z051 | LEADSCREW, PRIMARY |
| 52 | P1021Z052 | POINTER |
| 53 | P1021Z053 | MAIN TABLE |
| 55 | P1021Z055 | BALL BEARING 6202ZZ |
| 57 | P1021Z057 | SPROCKET 10T |
| 62 | P1021Z062 | E-CLIP 12MM |
| 63 | P1021Z063 | LIFTING BAR |
| 64 | P1021Z064 | BASE |
| 65 | P1021Z065 | IDLER BRACKET |
| 66 | P1021Z066 | IDLER SHAFT |
| 67 | P1021Z067 | IDLER SPROCKET 10T |
| 68 | P1021Z068 | EXT RETAINING RING 15MM |
| 69 | P1021Z069 | TABLE ROLLER |
| 70 | P1021Z070 | BALL BEARING 608-2RS |
| 71 | P1021Z071 | HEX BOLT M8-1.25 X 25 |
| 72 | P1021Z072 | HEX BOLT M8-1.25 X 45 |
Right Table
| REF | PART # | DESCRIPTION |
|---|---|---|
| 73 | P1021Z073 | INT RETAINING RING 35MM |
| 74 | P1021Z074 | FLAT WASHER 8MM |
| 75 | P1021Z075 | FLAT WASHER 10MM |
| 76 | P1021Z076 | HEX NUT M10-1.5 |
| 77 | P1021Z077 | CHAIN #410 X 134 |
| 78 | P1021Z078 | SET SCREW M6-1 X 12 |
| 80 | P1021Z080 | ECCENTRIC SHAFT |
| 82V2 | P1021Z082V2 | HEX BOLT M8-1.25 X 25 V2.04.20 |
| 83V2 | P1021Z083V2 | EXTENSION TABLE (CAST IRON) V2.04.20 |
| 86 | P1021Z086 | SET SCREW M8-1.25 X 12 |
| 143 | P1021Z143 | THREADED GIB |
| 144 | P1021Z144 | LOCKING ROD |
| 145 | P1021Z145 | KNOB 6-LOBE M12-1.75, D53 |
| 146 | P1021Z146 | GIB |
| 190 | P1021Z190 | RIVET 2 X 5MM |
| 212 | P1021Z212 | EXT RETAINING RING 10MM |
| 213 | P1021Z213 | GEAR 14T |
| 214 | P1021Z214 | INT RETAINING RING 38MM |
| 215 | P1021Z215 | SPACER |
| 247 | P1021Z247 | SET SCREW M10-1.5 X 12 |
| 248 | P1021Z248 | CAP SCREW M6-1 X 20 |
| 250 | P1021Z250 | FLAT WASHER 8MM |
BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. -69-
G1021Z Labels & Cosmetics
| REF | PART # | DESCRIPTION |
|---|---|---|
| 216V3 | P1021Z216V3 | MACHINE ID LABEL V3.02.19 |
| 217V2 | P1021Z217V2 | BELT COVER WARNING LABEL V2.05.18 |
| 222 | P1021Z222 | GRIZZLY NAMEPLATE-LARGE |
| 230 | P1021Z230 | INVENTORY SHIPPING NOTICE |
| 231 | P1021Z231 | DISCONNECT POWER LABEL |
| 232 | P1021Z232 | READ MANUAL LABEL |
| 233 | P1021Z233 | ADD OIL NOTICE |
| 234V2 | P1021Z234V2 | SHIFT GEARBOX NOTICE V2.02.19 |
| REF | PART # | DESCRIPTION |
|---|---|---|
| 235 | P1021Z235 | STOP OIL FILL TAG |
| 236 | P1021Z236 | EYE/EAR/LUNG INJURY LABEL |
| 237 | P1021Z237 | ELECTRICITY LABEL |
| 238 | P1021Z238 | GRIZZLY.COM LABEL |
| 239 | P1021Z239 | MODEL NUMBER LABEL |
| 240 | P1021Z240 | TOUCH-UP PAINT, GRIZZLY PUTTY |
| 241 | P1021Z241 | TOUCH-UP PAINT, GRIZZLY GREEN |
WARNING
Safety labels help reduce the risk of serious injury caused by machine hazards. If any label comes off or becomes unreadable, the owner of this machine MUST replace it in the original location before resuming operations. For replacements, contact (800) 523-4777 or www.grizzly.com.
-70- BUY PARTS ONLINE AT GRIZZLY.COM! Scan QR code to visit our Parts Store. G1021X2/G1021Z (Mfd. Since 11/20)
WARRANTY & RETURNS
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants. In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, special, or consequential damages arising from the use of our products.
The manufacturers reserve the right to change specifications at any time because they constantly strive to achieve better quality equipment. We make every effort to ensure that our products meet high quality and durability standards and we hope you never need to use this warranty.
In the event you need to use this warranty, contact us by mail or phone and give us all the details. We will then issue you a “Return Number,” which must be clearly posted on the outside as well as the inside of the carton. We will not accept any item back without this number. Proof of purchase must accompany the merchandise.
Please feel free to write or call us if you have any questions about the machine or the manual.
Thank you again for your business and continued support. We hope to serve you again soon.
To take advantage of this warranty, you must register it at https://www.grizzly.com/forms/warranty, or you can scan the QR code below to be automatically directed to our warranty registration page. Enter all applicable information for the product.
This page is blank.
grizzly.com
TOOL WEBSITE
Buy Direct and Save with Grizzly® – Trusted, Proven and a Great Value!
Since 1983
Visit Our Website Today For Current Specials!
ORDER
24 HOURS A DAY! 1-800-523-4777
VISA MasterCard DISCOVER NOVUS AMERICAN EXPRESS
