Outside angle for crown

[Perry Templeton]

Outside corner for crown molding. Inside corners are being coped. What is the angle and set up on a DeWalt 705 miter saw for cutting outside corners on 45 degree crown? Thanks. Perry

[Edwin Pawlowski]

I don't have a clue. The DW manual has that info though. If you don't have it, check their web age as they have it there IIRC.

[Duane Bozarth]

1. Set the crown at the angle it is mounted, then the angle is vertical. Use a filler backing against the fence if it's large.

[calhoun]

If you are talking the compound angles: (45 crown)

35.3 - miter 30 - bevel

If you are talking just a straight miter box than cut it upside-down at 45