Hi All,
I have a
K-3589 Kohler, Cimarron® w/class 6 technology (1.6 gallon) Toilet
with a
K-4647 Kohler, Stonewood closed-front toilet seat (elongated)
One of the bumper on the seat (not lid) is crushed. Kohler says that the bumpers are not replaceable.
Don't suppose there is a glue on fix for this?
If not, can you recommend a
White Wood
replacement seat. I can get the Stonewood from Home Depot, but maybe there are better ones you guys would recommend
Many thanks,
-T
I just looked down the crushed end of the bumper and the stinkers are press in.
Perhaps these bumpers from ACE Hardware would work for you
I have them on both toilets here. Work well after 6 years. Had them in the last house too. Reasonable price, comfortable, soft close. #36 at Amazon.
They always say things like that. Don't bother me boy, I'm busy.
If the seat is wood, as I found out it is, you can buy a toilet seat bumper that comes with built-in nails. If it's not the same height as the other side, you can pry off the other side and replace it too. I'll let you work out the other two.
This was rather ambiguous but Retired made it clear.
Sounds perfect.
I am going to ace tomorrow. I called ahead and they said they had them: isle 8. Beats a new toilet seat.
Thank you!
Have something to add? Share your thoughts — no account required.
Ask the community — no account required