Hi,
Cold water tap turned off, wire got bumped off of the fill valve during the repair, bad fill valve, fill hose was kinked pushing the washer back into place, temp selector switch is between settings....
Looked as if the pump was leaking...replaced the pump..reassembled the washer...now another problem.....
When it calls for cold water nothing enters the tub...no water. The hot water works fine...just not the cold...any ideas?
And could one of those problems have caused the pump to run dry and be damaged?
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.