Recently my HVAC in my condo stopped working. The fan will not come on. Even when I click the tstat to have the fan "on" instead of "auto".
There is a switch for the blower/fan that is next to the intake vent (and where the fan actually is) that I turn off to service the filter, and if I turn this switch to off, then to on, the fan will whirr up and stay on for about 10 seconds. During this time, the air does feel cool (to me) but after about 10 seconds, the blower turns off again for no apparent reason.
I have checked the breaker and it is OK.
The blower is made by first co. and the model is 30RAQT-3.
It sound like your circulation fan kicking out on thermal overload cause? few different things, one perhaps all it needs some lubrication or running cap shorted or your voltage to low or it simply wants take vacation be prepare to purchase new one. Tony
I was able to check the relay inside the outside unit (which has the fan and compressor). I found the following.
-The side coming from the switch out there has 110V.
-The other side does not.
-If I leave all power down and push down on the contactor, it fires up the compressor and as long as I hold it, it runs and seems to run ok (only tried this once because I didn't want to start/stop the compressor over and over).
I'm trying to measure the voltage that turns on the relay but I haven't seen any voltage there so I'm not 100% sure it's the relay. I'm not sure how the tstat works?
Of the 4 wires I have, W,Y,G, and RC, as the system sits right now, there is no voltage on any of them. If I flip off the indoor blower switch, then turn it back on, I get voltage between the W and G lines. I haven't been able to check if there is voltage outside at the relay during this because I don't have another person here right now to help me check. It appears as if the RC and W lines are the ones that connect to the relay, though. I haven't been able to read any voltage on these lines yet.
I'm wondering two things:
Does blower/fan "check" to see if the outside unit is working and shut down after 10 seconds or so if it is not?
How does the whole system work, ie, how does the tstat control it? It looks like it is just a bunch of relays and does not provide any actual power? What provides the power? The blower/fan circuit that provides the voltage on the W and G lines when it turns on? Is the RC supposed to have voltage between it and another line? Does this sound like a relay problem? I'm in the process of finding places locally to replace the relay as I it looks like it will be cheap to try it anyway.
I was able to check the relay inside the outside unit (which has the fan and compressor). I found the following.
-The side coming from the switch out there has 110V.
-The other side does not.
-If I leave all power down and push down on the contactor, it fires up the compressor and as long as I hold it, it runs and seems to run ok (only tried this once because I didn't want to start/stop the compressor over and over).
I'm trying to measure the voltage that turns on the relay but I haven't seen any voltage there so I'm not 100% sure it's the relay. I'm not sure how the tstat works?
Of the 4 wires I have, W,Y,G, and RC, as the system sits right now, there is no voltage on any of them. If I flip off the indoor blower switch, then turn it back on, I get voltage between the W and G lines. I haven't been able to check if there is voltage outside at the relay during this because I don't have another person here right now to help me check. It appears as if the RC and W lines are the ones that connect to the relay, though. I haven't been able to read any voltage on these lines yet.
I'm wondering two things:
Does blower/fan "check" to see if the outside unit is working and shut down after 10 seconds or so if it is not?
How does the whole system work, ie, how does the tstat control it? It looks like it is just a bunch of relays and does not provide any actual power? What provides the power? The blower/fan circuit that provides the voltage on the W and G lines when it turns on? Is the RC supposed to have voltage between it and another line? Does this sound like a relay problem? I'm in the process of finding places locally to replace the relay as I it looks like it will be cheap to try it anyway.
Go ahead and replace the relay, spend money you don't have to. Now read my lips, ITS NOT THE FUCKING RELAY. Now go call somebody that knows WTF they're doing.
You guys are ridiculous with the free comments. Most online forums are for just that - free advice. You guys run your forum like a bunch of nazis, but that's OK, it's your forum.
Anyway, I had the system serviced today.
The primary was clogged and the emergency filled up to the water switch so the switch would not let it engage.
Additionally, there was a bad connection on the transformer so the tstat and outside contactor were not getting proper power.
You know Mr. Kjpro I feel sorry for the area you are living in because you are must OBNOXIOUS STUPID JERK I EVER ENCOUNTER IN MY 69 YEARS OF LIFE And the only reason you are successful? because the lack of competition in your area!
As for Andrew I have giving him must accurate answer per his original posting that anybody can give.
So Mr. Kjpro put your head in toilet bowl and flushed couple times that you don't leave anything smell behind I hope you can understand that JERK! Have nice day jerk of jerks Tony
HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.