Modular plywood shelf built from small offcuts

Nov 17, 2026 Last reply: 9 minutes ago 3 Replies
Saved reading
Jump to replies (3)

The hardest problem here was obvious from the start: 9mm plywood is thin and flexible, and turning it into something sturdy is not straightforward. Aribabox solved it by gluing up narrow strips into rigid I-beam uprights, then leaning on geometry instead of material thickness to get the stiffness. That approach seems to me the smartest part of the whole project, since it lets small offcuts do work normally reserved for thick stock.



Everything was cut on a custom CNC router with a Makita spindle sitting above an oriented strand board base. Small pieces were registered against an L-shaped reference block, and the narration describes a nesting strategy aimed at small bed sizes. Edges got refined on an integrated workbench router table, and CAD animations show how the strips combine into the uprights. For anyone cutting small parts, that reference block detail alone looks worth studying.



Assembly followed a clear sequence: the interlocking dovetail-style joints were tapped home with a wooden mallet, holes were pre-drilled, and the laminated strips were secured with wood screws driven by a cordless drill. The finished unit was then expanded with a second adjoining modular bay, which is the whole point of the system, since it can grow as workshop storage needs grow. Nested storage boxes cut from leftover scraps filled some of the bays, and the shelf was loaded with paint cans and tools.



Load testing looked convincing: a 16 kg kettlebell was rested on a horizontal beam, and the maker hung body weight from the frame. One open question for me is screwing into 9mm edges; that feels tight, and 12mm stock might be more forgiving, though it would eat more material.



Project by Aribabox. Watch it on their YouTube channel:

formatting link


The L-shaped reference block is the detail that stands out to me. Registering small offcuts against a fixed corner makes repeatable placement on a small bed much easier, and it pairs well with the nesting approach for limited space. The trade-off is that every piece depends on consistent registration, so any slop in that corner shows up in the joints.

How does the second bay actually attach to the first one? The interlocking dovetail-style joints are described for the I-beam uprights themselves, but I am curious whether the bays share uprights, bolt together face to face, or just sit adjoining. The expansion idea is the strongest part of the concept for me, so the connection method matters a lot.

A concrete variation: cut the nested storage boxes in two or three graduated sizes that stack inside each other, all from the same scrap pile. Since the boxes already come from leftovers, sizing them around the bay dimensions would turn every last offcut into usable inventory space, and graduated sizes would waste far less material than cutting each box to a random size.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required