The challenging aspect of this pool house roof project involved dealing with significant structural deterioration. The previous valley had suffered from extensive rot, and the old cedar shingles had essentially reached the end of their lifespan after sixteen years. This required the replacement of numerous roof boards before the work could proceed. The maker approached this by installing a low-slope circular half-turret tied into a standard gable structure.
The installation involved covering the entire structure with new wood cedar shingles. Each shingle received a five-minute dip in Pentox waterproofing. A key technical detail involved adjusting the shingle exposures during the fitting process to maintain uniformity across the curved surface. The roof was finished with a blue-sinking treatment to prevent water from penetrating the materials.
The design features an exposed valley, which was requested by the customer for its aesthetic appeal. This valley is defined by a dark brown metal flashing strip that runs six inches under the shingles in both directions. Near the ridge, a roof-mounted bracket and weather vane base were included as components of the build. The maker noted that the appeal of the design might stem from having no fasteners directly in the valley.
This unique combination of materials and structural geometry presents an interesting look. The final finish is notable for the way the dark metal flashing contrasts with the cedar and the blue-sinned shingles. It is clear the maker found this project enjoyable.
Project by xhjbta. Watch it on their YouTube channel: