replacing flourescent strip light

All, I would like to remove the strip light we have in the kitchen and replace it with halogen spot lights. Simple question - are the electrics the same or will I need to make any changes to the cables feeding the mounts ?? Different thickness for different power etc etc ?? Maybe a silly question, but better to ask !
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

The existing cabling should be fine for this. It will be a simple case of transferring the red "L" and black "N" to the L and N connections on the new fitting. You should also have an earth connection on the fitting marked by an "E" or an arrow like symbol, which is connected to the green/yellow covered conductor.
--
www.basecuritysystems.no-ip.com

Outgoing mail is certified Virus Free.
  Click to see the full signature.
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload
BigWallop wrote:

Thanks - I'm fine as far as the electrics go (I should be - I have a degree in it!!), just wasn't sure about the fittings, cable diameter etc etc.
Cheers.
Add pictures here
<% if( /^image/.test(type) ){ %>
<% } %>
<%-name%>
Add image file
Upload

HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.