Gap between houses?

What can be done to weather proof a narrow gap formed where a person is building on his own land alongside the external wall (e.g. an earlier back garden extension built up to the Adjoining Owner?s side of the boundary line?

It is good practice to prevent debris collecting in (or animals entering) the small gap between two adjacent independent structures and the Act allows for any works ?incidental to the connection of a structure with the premises adjoining it?. There are several proprietary products that can effectively seal the gap between two buildings without having to cut into or permanently fix to either building. The Building Owner erecting the second structure would usually carry out this work.

formatting link

Reply to
polygonum
Loading thread data ...

The Building Regulations do not cover the distances to a boundary (except for any unprotected area on or facing a boundary and for the fire resistance of the materials) nor access for maintenance or repair.

Reply to
Hugo Nebula

On Friday, February 1, 2013 9:11:22 AM UTC, polygonum wrote: =20

In the '60s my father, a builder,bought a house with a similar gap between= the adjacent properties. The basement was damp and uninhabitable. He cut o= ut and replaced an entire course of bricks in segments, inserting a slate d= amp proof layer. Apparently,he got lots of dead cats out of the gap between= the houses.

Reply to
Onetap

GB wrote: (14-foot house)

14 feet? Loads of room. This one's in for planning permission for the second time. Slightly less than 10 feet:
formatting link
Reply to
jgharston

How about this one for sale near me ? It is 8 feet.

formatting link

Reply to
sm_jamieson

Actually counting the bricks its a bit wider, the internal rooms are 8 feet. Simon.

Reply to
sm_jamieson

That's the first time I have seen paddle stairs used as the access to the first floor.

Reply to
Andrew May

formatting link

Wouldn't fancy getting a wardrobe up there unless twas to be built in situ

Reply to
fred

HomeOwnersHub website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.