Woodworking Forum

  1. Home
  2. Woodworking Forum
51629 Threads Posts
to

Worth reading in Woodworking Forum

Paint Stripping Question

My research continues, in my search for something that will strip paint, won't eat my brain, and doesn't require dispos...
6 comments posted 21yrs
posted by Jakofalltrades
6 comments posted 21yrs posted by Jakofalltrades

looking for several items

Hello,I am fairly new to woodworking, and was told by other groups,that you might could help. Made my sis on the east c...
1 comments posted 21yrs
posted by marion711
1 comments posted 21yrs posted by marion711

what finish for my floor

Hi all! I'm a DIY'er with just enough info/experience to be dangerous! I just sanded the finish off a 30 year old oak f...
16 comments posted 21yrs
posted by sslaird
16 comments posted 21yrs posted by sslaird

Carter/Canwood Tension Lever

Has anyone had the spring on their tension lever pull it's rivots out? I went cheap with a Canwood copy of the Carter t...
1 comments posted 21yrs
posted by tsw632
1 comments posted 21yrs posted by tsw632

Router Jig for half-lap joints

Anyone got a link or two? I'd like to be able to have it the boards together, for gang-dadoing, and also down to the be...
8 comments posted 21yrs
posted by JayPique
8 comments posted 21yrs posted by JayPique

Jointing Question

I am making the top for a hall table and the boards I bought today are both 9.5" wide. The top needs to be 14.5" wide....
17 comments posted 21yrs
posted by .
17 comments posted 21yrs posted by .

bar plans

Anyone know where I could find some basement bar plans?
3 comments posted 21yrs
posted by compguy707
3 comments posted 21yrs posted by compguy707

Back bevel works well (and two questions)

I own the LV low angle smoother and have an extra blade, the high angle optional blade, ground at the factory to 35 deg...
32 comments posted 21yrs
posted by David
32 comments posted 21yrs posted by David

Vacuum press bags

Looking for a source for a vacuum press bag. I already have a pump. Any ideas? Thanks in advance.
3 comments posted 21yrs
posted by 1ajdeluca
3 comments posted 21yrs posted by 1ajdeluca

Planing against the grain?

Hi all, I am making a 24" diameter cherry globe and I need some advice. After making 18 piece segmented rings, I need t...
7 comments posted 21yrs
posted by marmac2
7 comments posted 21yrs posted by marmac2

FS Jet lathe and accessories

Located in Roswell, GA I'm selling my Jet 1236 lathe (approx 6 years old) lathe is blue and in good working condition....
1 comments posted 21yrs
posted by mschw04
1 comments posted 21yrs posted by mschw04

Need Picture of Bow ties in a table top

After about 30 minutes of looking I still cannot find a picture of bow ties used to join pieces of a table top. Can some...
8 comments posted 21yrs
posted by JGS77Stamp
8 comments posted 21yrs posted by JGS77Stamp

Bending/twisting wood (was Bending Oak)

I have a project I'd like to try. It's fairly small, the pieces are no longer that 10". I don't have the means (money)...
3 comments posted 21yrs
posted by nospam
3 comments posted 21yrs posted by nospam

FAQ?

Miss the URL that used to be posted occasionally. Seems like some newbies would benefit if it was posted again.
2 comments posted 21yrs
posted by nospambob
2 comments posted 21yrs posted by nospambob