My current job is all but delivered. A customer wanted me to convert their built-in cabinet and book shelves into an entertainment center.
Stage 1. Adding walnut panels and hanging the TV.
formatting link
Next step is to deliver the balance of the job.
As I have previously mentioned, I have a Shaper Origin and here is the lay out for the fabric grill reinforcements being cut out of 1/2" Baltic birch.
formatting link
CNC work completed.
formatting link
Reinforcements cut apart.
formatting link
Reinforcements test fit.
formatting link
The reinforcements and fabric installed in the electronics garage doors. This unit will be placed under the TV and on top of the lower cabinet in the top picture.
formatting link
The lower cabinet doors.
formatting link
Didn't find your answer? Ask the community — no account required.
D
DerbyDad03
Excellent work. Did it pay for the Shaper? ;-)
Will the TV cables eventually be hidden?
S
Sonny
Good job, as usual.
How about a pic of that quilt on back of the love seat, also!
Sonny
L
Leon
Thank you. Did it pay for the Shaper? No. But it probably saved me a days work. So that could equate to several hundred dollars. The Work that I did with the Shaper saved me from cutting 35 pieces of wood, cutting 108 Domino mortises, 54 joints, and gluing up all those pieces into 7 frames.
About 6~7 years ago I did this for our entertainment center but with only 3 doors and the frames were not much fun and very time consuming. The pieces were/are 1/2" thick and at the most 1" wide, several 1/2" wide.
Yes. The cable you see in the picture will simply be routed behind the walnut panel. The walnut panel is floating 3/4" out from the wall. It is hung by a 60" long french cleat near the top and 2, 24" long cleats near the bottom on each side. This bottom cleats have a separation of about 10" in the center to make an opening behind the walnut panel for the cables to drop down through. From there the cables will enter into the back of the garage. The electronics garage will be taller than the bottom of the walnut panel.
formatting link
L
Leon
On 8/27/2020 3:35 PM, Sonny wrote: Snip
Thank you.
formatting link
And one she recently finished.
formatting link
formatting link
S
Sonny
Fantastic! My sisters would love those quilts, as well.
Sonny
D
DerbyDad03
Hmmm...We may have found someone more talented than you. (and you can tell her I said that)
L
Leon
We hear that all the time. ;~) I take credit for giving her a class certificate, as present, to learn quilting about 20 years ago. And talking her into buying the expensive equipment. We have invested more in her machines than mine.
I'll tell her!
D
Dave in SoTex
If mama ain't happy . . . .
Dave in SoTex
K
knuttle
I know this is completely off topic. I do a lot of genealogy, and have looked at many Deeds. There is one clause in most deed that goes back to English Common law. In many deeds, the wife has to agree to the sale of the property. In some older deeds, it actually states that they took the wife to a different room to get her approval. I have always considered it the "If mama ain't happy" clause
L
Leon
She "was" happy, now, much happier with the equipment!!! .~)
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required
Report Content
You are reporting this content to the moderators. They will look at it
ASAP.