Yes. It's not just the energy but the pitcher's reaction time. A fastball off the bat would hit the pitcher before he could possibly defend himself. Pitchers are expensive.
The 55MPH speed limit was abolished years ago. ;-)
You're nutz. Politicians have nothing to do (drugs being the obvious exception) with MLB rules.
Uh huh. Ten percent makes the difference between reacting and not reacting? If the margin is that close then they need to increase the distance to the plate.
Traffic laws have zip all to do with bat design.
No, they have to do with the laws in several states that prohibit the use of aluminum bats.
I believe you are right!
Apparently. Changing the distance to the pitchers mound changes the entire game.
Whoosh!
Ok, you now owe us a citation that shows "several states" that have banned aluminum bats from MLB (or any other) games.
Yep, but if it only saves one life . . .
Huh? I really don't know what point you think you were making. Are you suggesing that the rules concerning the performance of bats have been rescinded? If so you might want to inform the NCAA as they seem to be unaware of doing so.
So far the only one that has passed was NYC, but several states have legislation in progress.
So does keeping the wood bat. Aluminum changes the whole game. It's a much faster bat so imparts more energy to the ball.
Never mind. ...not worth 'splainin'.
Cite.
krw wrote: ...
Give it a rest--google for it if you really don't know and want to...
OTOMH, I know at least ND has legislation pending, several states have various measures in place for high schools being required (mostly by their state HS athletic associations as opposed to actual legislation.
I'm not sure the actual status in NYC -- Bloomberg was going to veto it, but the initial passage was by a large enough margin to override. Where it stands in the process, though, I've not followed.
You made the assertion, support it.
We were talking about MLB. I can understand schools banning such things. Some communities ban all baseball bats at certain times of the day, but that has nothing to do with the speed of the bat.
I'm surprised. Bloomberg is an idiot.
Actually, no I didn't; I just have heard enough of it owing to being involved enough to know what has been going on to know you're just itching for an argument (altho the other poster hasn't been particularly politic, either)...
The conversation, as near as I can tell, was general, not restricted to MLB.
--
J. Clarke wrote: ...
Recall, however, that KE ~ V^2 so a 20% in energy translates into over
40% higher velocity. That much difference would make a _big_ difference in reaction time for evasion/self-defense...--
between no injury and
higher velocity. That
evasion/self-defense...
I think that you need to check your math.
Uh, try that calculation again. You did it backwards.
between no injury and
higher velocity. That
evasion/self-defense...
Yeah, brain cramp there, for sure...shoulda' known no chance nobody woulda' noticed before I got back to note the gaff... :(
--
On the subject of aluminum bats. I am sure that if there was money to be made, one of the manufactures of the bats could design and make a bat that would duplicate the characteristics of wood bats.
"p4o2" wrote
On the subject of aluminum bats. I am sure that if there was money to be made, one of the manufactures of the bats could design and make a bat that would duplicate the characteristics of wood bats.
******************It would be too hard to veneer the aluminum bats.
There is a measurement in the making of golf heads (COR) that could be applied to Al and wood bats. The choice of an Al alloy, wall thickness, etc. that would match the measured COR of wood bats would be possible. I would also guess that different wood bats would have different COR's?
It's a weight issue. It's tough ot make AL dense enough. Stainless=20 would work I suppose. ;-)
--=20 Keith
p4o2 wrote in news:0a6e96cf-70b6-4d3f-ab45- snipped-for-privacy@z72g2000hsb.googlegroups.com:
I actually had one that's not too far off. It's a rather heavy bat, though, but it clunks instead of pings. I don't remember seeing it recently, so it might have gone away...
Obligitory woodworking content: I made a bat rack and hung my bats on it. (A dowel rod thick enough to allow two bats to rest on one peg usually provides enough space between the bats.)
Puckdropper
Aluminum is already denser than any wood.
I guess that's true. They could make aluminum bats heavier, but don't (need to).
Have something to add? Share your thoughts — no account required.
Ask the community — no account required