Wifi analysers

Jul 18, 2023 Last reply: 3 years ago 22 Replies

I haven't changed any settings on my phone other than increase the size of the font to maximum and using dark mode.

It's a Motorola Moto G31 with Android V11

If I use the wifi analyser that others here use, my Wifi shows this -

Skyd-NN(ec:**:**:**:**:**) <- normal solid font

-60dBm CH 11 2462Mhz -6.9m <- only CH 11 is solid font <picture> 2452-2472(20 Mhz) <- 'funny' font, plus above line

The neighbours show similar but the first line is

[WPS WPA2] <- in funny font.

When I look at my test results on SYSTM Online (or what ever it is called), the actual result values use this font and the usual method of stretching the screen does not work.

I have 'dropped shadows' with both eyes, but each eye has dropped shadows in different directions. After an incident with my dremel fitted with the little drum of sandpaper, which I used to remove the paint and surface rust from the wheelarch in front of the rear wheel on my previous car back in 2012, I must have rubbed fine ferric oxide dust into my eye. Night driving was awful. Car headlamps looked like those photographic special effects (fireworks).

I had to tell the DVSA and they sent me to Specsavers but I passed the test. I can only just read a number plate with one eye but the DVSA only care about the ability of both eyes working together.

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required