Hi all
Moved into a new place recently, and there were problems with the heating as some of you may have read.
I invested in a new programmable hallway wall thermostat and installed it today. However, during installation the main heating fuse just blew (in the white on/off wall switch). Turns out it had been fitted with a 13A fuse not
5A. Yet another problem the sellers left me, grr.Anyway, I have replaced the fuse and the wall switch now lights up as before, however the heating still won't come on. Hot water is fine.
Before it blew, the new stat was working fine. I have also put back the old one, but that doesn't turn on the radiators either as it used to. I doubt both stats have gone.
What else in the electrics could have blown, if not the wall stats and not the main wall switch fuse?
Thanks for your urgent replies :)