Harry Bloomfield wrote in
> news: snipped-for-privacy@tiscali.co.uk:
>
> > Pip pretended :
> >> I assume that somebody at some point has oiled the cable, and last
> >> time I had the wheel out I packed the drive with Lithium grease - in
> >> this hot weather could the grease liquify and make its oozing way up
> >> the cable, to emerge at the back of the speedo?
> >
> > Dunno.
> >
>
> Always so helpful and knowledgeable is our Harold.
>
> >>
> >> The seondary question is - should I be worried and/or be worried
> >> enough to do something about it - and if so, what?
> >
> > Yes, it will eventually find its way into the speedo head.
> >
> > You are only supposed to apply grease on the inner cable stopping at a
> > point 6" below the head. I would be inclined to suggest washing out the
> > oil and/or grease from both the inner and outer cable, drying it
> > thoroughly then re-apply grease to all but the upper 6" of the inner. > > > > Filth!
>
> --
> Phil Kyle Usenet Anti-Christ
> jjyjrrjyjyjyjjjyjyjjyjyjyyjyyjj
>
formatting link
enlphgyrevfnphagrgegrgrgregrge
please don't post this stuff on a ham radio newsgroup. it's off topic here.
THX