I've to make a small door to cover a recess that originally had a
tumble drier in it under the stairs. The area is wood lined with 10mm
thick pine that has a 10mm wide flat section about 3mm deep instead of
a 'V'. Anyone know how this is referred to and whether it is still
This site has a lot of moulding profiles you can browse through to see
if any match your need.
If not, most timber merchants can make profiles against order to a
drawing or sample. From what you say, it ought not to need any special
tools, so should be quite reasonably priced.
HomeOwnersHub.com is a website for homeowners and building and maintenance pros. It is not affiliated with any of the manufacturers or service providers discussed here.
All logos and trade names are the property of their respective owners.