Interceptor trap for rainwater soakaway

Mar 19, 2014 3 Replies

I live in an old cottage without mains drainage. There may well have been some sort of soakaway in the past for downpipes on either side of the cottage but they are no longer functioning and I'm about to install 2 modular cell soakaway systems.



What is not apparent in the write up about these things is how to trap solids - leaves, moss, grit and the likes - getting into the 'tank' and clogging it like the old fashioned hole in the ground has clearly become.



Can anyone give any guidance please.



Rob


I've fitted a trapped gully with a grid on the inlet to screen leaves and the trap itself will trap gravel. The rainwater pipe terminates in a shoe a few inches above the grid. A precast concrete surround protects the gulley. This arrangement has been in use since 1985 with no known problems.

hth

Yes, that is the way to go.

You need to watch out, a lot of these "modular" systems can't be accessed for cleaning out. Typically, they are just like a pile of plastic milk crates wrapped in plastic.

You might consider rainwater recovery/harvesting to flush the toilet/washing machine & then go on metered water supply & save somemoney as your water consumption would be small.

Sorry Harry - should have said Scotland where a) water costs nothing and b) we have plenty of it. I could make a comment about some parts of England being wetter than Scotland but that is not PC just now !

The other factor is that anything I do now should have an adequate lifetime to see me out and be someone else's problem when it ceases to work.

Thanks Bob for your help.

Rob

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required